The Government of India is further improving the standards of products by increasing the number of industrial products under mandatory product regulation. It is now time for your company to make preparations for compliance with the new regulations when you manufacture, import, or distribute the BIS Certification for Combination Side Cutting Pliers. DPIIT has published the notification for the said products under the Hand Tools (Quality Control) Order 2025, and the certificate under the Bureau of Indian Standards (BIS) will become mandatory on 1st October 2026.
The above notification not only talks about the compliance regulation but also its impact on manufacturers, importers, OEMs, and brand owners who intend to supply these products in the Indian market. Companies that tend to certify at the implementation date may face some delays in terms of testing, documentation, factory inspection, and product approval.
In this blog, we will learn about the new notification BIS QCO, who needs to comply, and preparation for BIS certification before implementation. And how UMSPCS will guide you throughout the process of the certification journey.
What is the DPIIT Notification for Combination Side Cutting Pliers?
Hand Tools (Quality Control) Order 2025 has added BIS Certification for Combination Side Cutting Pliers. The notification states that the products falling under the mentioned Indian Standard IS 3650:1981 will have to be licensed by BIS before their manufacture, import, sale, or distribution in India from the notified date.
Once certified, manufacturers are allowed to affix the ISI Standard Mark to the product, which indicates that the product meets the applicable Indian Standard and meets the required quality and safety standards.
The notification is intended to improve the quality of the product, remove substandard tools from the market, and ensure there is a more consistent manufacturing method throughout the industry.
What is a Quality Control Order (QCO)?
The Quality Control Order (QCO), which is a type of legal notice issued by the Government of India, is used to make sure that some products meet the specified Indian Standards (IS). This implies that no company will be able to manufacture, store, sell, and distribute the product if it does not have the required BIS certification.
A main thrust of any QCO should be to enhance the quality of the product, to keep consumers safe from the product being unsafe, and to ensure that any product that is available for sale in the Indian market meets recognised international performance and safety requirements.
It is important for manufacturers to regularly check the importation of any new Quality Control Order that may fall under their notified product to prevent any problems in the future.
Understanding Combination Side Cutting Pliers Under IS 3650:1981
Wires and small pieces of metal can be held, cut, bent, and twisted with Combination Side Cutting Pliers, an all-purpose tool. The user can accomplish several tasks with the same tool thanks to its powerful set of jaws with cutting edges.
The pliers are versatile and are extensively used in electrical and mechanical maintenance, manufacturing, repair shops, and construction work where precise and reliable work is required. IS 3650:1981 is the Indian standard, which describes all the requirements regarding quality, sizes, workmanship, materials, and performance of the tool.
Adhering to the relevant standard is a way for manufacturers to supply products complying with a quality standard and to build customer trust.
Where are Combination Side Cutting Pliers Commonly Used?
Combination side-cutting pliers are popular in many industrial and commercial applications, such as:
- Installing and repairing electrical equipment.
- Mechanical engineering workshops
- Car making and servicing
- Construction projects
- Industrial maintenance
- Manufacturing facilities
- Power generation plants
- Telecommunications services and utilities.
- All general work of repair and maintenance
These tools are often used in precision applications, and maintaining quality and performance is essential for productivity and safety in the workplace.
Who Needs to Comply with the New BIS Requirement?
The Quality Control Order applies to the manufacturing/supply of Combination Side Cutting Pliers in the Indian market.
This generally includes:
- Indian manufacturers
- Importers
- The export of products from abroad to India by foreign manufacturers.
- The OEM and contract manufacturers
- Owners of brands who sell products under their own brand name.
The preparation to be certified should start at least a month before the enforcement date of the notification to avoid disruption of production and market access.
Why Has BIS Certification Been Made Mandatory?
The use of combination spanners is widespread within different industrial areas because of their efficiency and reliability. Poor-quality tools tend to wear quickly, may malfunction during the operation process, and may be dangerous for workers.
The Government is requiring BIS certification to help to ensure that:
- Gain an advantage in product quality and reliability.
- Make sure of the compliance with Indian Standards
- Keep users safe from inadequate tools.
- Boost buyers’ confidence in industrial products.
- Encourage common manufacturing methods.
- Promote competition among hand tool manufacturers
What Happens if Businesses Do Not Comply?
After the enforcement of the Quality Control Order on 1st October 2026, businesses may not legally produce, import, store, and sell the Combination Side Cutting Pliers listed in the notification without a BIS licence.
Failure to comply could lead to:
- Control on production and distribution
- Product launches delayed or postponed.
- Loss of business opportunities
- Supply chain disruptions
- The BIS Act, 2016, provides for regulatory measures.
- Loss of customers’ confidence and credibility in the market.
Early initiation of the certification process will prevent such risks for manufacturers.
How Can Manufacturers Prepare Before 1 October 2026?
The implementation period provides businesses enough time to build up their compliance readiness.
Manufacturers should:
- Identify if their product is covered by the notified QCO.
- Check compliance with IS 3650:1981.
- Get tested in a BIS-approved lab.
- Create technical documentation and manufacturing records.
- Check calibration of testing equipment.
- Describe in-house quality assurance processes.
- Get the factory for BIS inspection.
- Begin the certification process at least in advance of the date by which the regulation will go into effect.
Preparing ahead mitigates delays and guarantees uninterrupted access to the market
Step-by-Step BIS Certification Process for Combination Side Cutting Pliers
The certification process should be commenced well in advance of the implementation date so as not to delay product approval and market access for manufacturers. The typical steps in the BIS Certification for Combination Side Cutting Pliers process are:
The following is a streamlined process:
Procedure for Indian Manufacturers (ISI Mark Licence)
Filing of the Application
Ensure that your business and product information are all provided in your application on the BIS Portal, accessible from the Manak Portal. Include any additional documents.
Product Sample Testing
The BIS provides you with guidelines on how to submit the product samples to a laboratory approved by the BIS. The samples are tested as per IS 2028:2004 standards for jaw strength, dimensions, material composition, and other variables.
Factory Audit
A BIS official will come to inspect your factory regarding your manufacturing process, quality assurance, and testing equipment, among other aspects.
Permission Granting
The BIS provides an ISI Mark license on the basis of another CM/L number after your product is successfully tested and your factory meets the requirements of BIS.
Sale and Marking
Your legal selling and marking of the pipe wrenches in India can now begin through the ISI Mark.
Market Sample Testing and Factory Audits
Random testing of market samples and periodic factory visits are carried out by the BIS. Licence renewals provide for constant compliance.
For Importers (Foreign Manufacturer Certification Scheme)
Appointment of Authorised Indian Representative (AIR)
Foreign companies are expected to appoint an AIR in India for further dealings with BIS.
Filing an Application
Applications have to be filed through the BIS FMCS App on the basis of product data, company documents, and factory data.
Testing of Samples of the Products
Samples of the products are subjected to testing in labs authorised by BIS in India or abroad.
Inspection of Foreign Manufacturing Unit
Pre-inspection of the foreign manufacturing units is carried out by BIS before granting the licence.
Grant of License
A licence for importing and selling the products in India is issued.
Documents Required During Combination Side Cutting Pliers
When applying for BIS Certification for Combination Side Cutting Pliers, you are required to upload the following documents, which are as follows:
For Indian Manufacturers
- Business Registration Certificate
- Certificate of GST Registration
- Factory layout and proof of address
- The manufacturing process and the flowchart
- Internal testing apparatus and facilities
- Technical specifications and drawings that adhere to IS 2028:2004
- Test findings from the laboratory accredited by BIS/NABL
- Internal testing protocol and quality assurance strategy
- Authorisation letter
For Importers / Foreign Manufacturers
- Records from the nation of origin about legal entities and company registration
- An authorisation letter designating an Indian representative (AIR)
- Technical specifications and product drawings
- Test report examples
- Details regarding the quality control and manufacturing documents
- Import-export documents and the IEC Code
- Evidence of brand or trademark ownership
- Records from the nation of origin of legal entities and company registration
- An authorisation letter designating an Indian representative (AIR)
- Technical specifications and product drawings
- Test report examples
- Details regarding the quality control and manufacturing documents
- Import-export documents and the IEC Code
- Evidence of brand or trademark ownership
Why Choose UMSPCS for Combination Side Cutting Pliers Certification?
Technical documentation, lab coordination, factory inspections, and communication with BIS authorities are all requirements for obtaining BIS certification. Without the proper expertise, managing these activities can often extend the time taken for approval.
UMSPCS offers full certification assistance services, such as:
- Product applicability assessment
- Documentation preparation
- Coordination with the laboratories recognised by BIS.
- BIS application filing
- Factory inspection assistance
- BIS query handling
- End-to-end compliance support
Our experts have completed more than 600 successful BIS certifications and have 6+ years’ experience in the field of regulatory compliance, assisting manufacturers in achieving BIS certification efficiently and confidently.
Conclusion
The DPIIT notification for Combination Side Cutting Pliers is another step towards enhancing the quality and reliability of hand tools used in the industrial sector in India. Producers, importers, OEMs, and foreign suppliers should start planning for BIS certification well in advance of 1 October 2026 to ensure proper compliance with the regulations and minimise business disruption.
Comprehending the applicable requirements, beefing up internal quality assurance systems, and beginning the certification procedure early will help companies ensure smooth compliance and keep on providing products with certainty to India.
Looking for help with BIS Certification?
UMSPCS can support you in the whole certification process of your Combination Side Cutting Pliers, ranging from the product eligibility evaluation and documentation to laboratory coordination, factory inspection support, and the approval of the BIS certificate.
Talk to our compliance experts today and feel prepared for BIS requirements in the future.
Read more also: Manak Online (BIS Portal) Guide: Registration, Login, & Documents
FAQs
- What is the time period for mandatory BIS certification for Combination Side Cutting Pliers?
The notified Hand Tools (Quality Control) Order, 2025 states that starting on October 1st, 2026, the BIS certification will be required.
- Which Indian Standard applies to Combination Side Cutting Pliers?
The applicable Indian Standard is IS 3650:1981.
- Who should get BIS certification?
It must be complied with by Indian manufacturers, importers, foreign manufacturers, OEMs and brand owners, who are supplying the notified product in India.
- Is there a factory inspection by BIS?
Yes. BIS normally inspects the factory before issuing the licence.
- Can foreign manufacturers get BIS certification?
Yes, through an Authorised Indian Representative, foreign manufacturers can apply for the BIS Foreign Manufacturers Certification Scheme.
- What service does UMSPCS provide for BIS certification?
UMSPCS offers end-to-end assistance, from documentation to testing coordination, application filing and factory inspection support, up to providing guidance after the certification.
❓ Ask a Question
Have any doubts? Fill the form below and our team will respond shortly.
