UMSPCS-Compliance

High Density Polyethylene HDPE Laminated Woven Lay Flat Tube and Fittings for use in Rain Irrigation System

Indian Standard Compliance

High Density Polyethylene (HDPE) Laminated Woven Lay Flat Tube and Fittings for Use in Rain Irrigation System - BIS Quality Control Order

Conformity Assessment & Regulatory Compliance

IS 17728 : 2021

27 Sep 2023

28 Mar 2024

High Density Polyethylene (HDPE) laminated woven flat tubes and fittings are significant agro-textile products that are used in rain irrigation systems to distribute water over agricultural fields. They are able to mimic natural rainfall by releasing water through holes, thus enabling a fairly even distribution of water onto the crops. Because of their flexibility, durability, ease of installation, and water-saving properties, they are appropriate for a variety of agricultural and horticultural uses.

The specific quality and performance requirements for these products are set out in the relevant Indian Standard, IS 17728:2021. The Agro Textiles - High Density Polyethylene (HDPE) Laminated Woven Lay Flat Tube and Fittings for Use in Rain Irrigation System - Specification is the standard that explains the construction, performance, and other essential requirements for HDPE laminated woven lay flat tubes and their fittings.

This standard includes various points related to the raw materials, manufacturing, construction, physical properties, and durability and performance in water distribution, and compatibility with the fittings required by such tubes. Manufacturers following Indian standards will be able to ensure consistent product quality so that the irrigation tubes and fittings comply with the specifications needed for agricultural usage.

Requirements of Quality Control Order

The HDPE laminated woven flat tubes and fittings intended for use in rain irrigation systems are included within the scope of the Agro Textiles (Quality Control) Order, 2023; the government notification names IS 17728:2021 as the relevant Indian Standard and stipulates that the products in question must comply with this standard and be marked with the BIS Standard Mark under a valid licence.

Any manufacturers, importers, and other companies that are involved in products falling within the scope notified should meet the relevant BIS certification requirements before they manufacture, import, distribute, or sell these products in India. It is necessary for businesses to check the most recent QCO notifications, any amendments, and the applicable exemptions before carrying out any commercial activities concerning these products.

Key Requirements for HDPE Laminated Woven Lay Flat Tube and Fittings

Important product characteristics and technical requirements under IS 17728:2021 include:

  • Raw Material Requirements
  • HDPE Fabric Construction
  • Lamination
  • Dimensional Requirements
  • Perforation Requirements
  • Mechanical Strength
  • UV Resistance and Durability
  • Pressure Performance
  • Water Distribution Performance
  • Fittings Requirements

The specific requirements and acceptance criteria should be determined on the basis of the relevant clauses and tables in IS 17728:2021, and the BIS product manual also gives advice regarding sampling, testing equipment, inspection, and the Scheme of Inspection and Testing for manufacturers.

Uses of HDPE Laminated Woven Lay Flat Tube and Fittings

HDPE laminated woven flat tubes and fittings are mainly used in rain irrigation systems in order to distribute water over agricultural fields, with water being released from the tubes through their perforations, thus producing a rainfall-like irrigation pattern.

Common applications include:

  • The watering of onion and other vegetables planted close together.
  • The distribution of water in the cultivation of leafy vegetables.
  • The watering of agricultural fields and horticultural crops.
  • The management of water in plantation and farming areas.
  • Those applications which need a flexible irrigation system, light in weight, and easy to move.

These products serve to spread water over agricultural land while at the same time reducing water waste; their flexibility and the ease with which they can be maintained also make them appropriate for various field conditions.

Conformity Assessment under BIS Certification

The BIS certification of products falling within the scope of IS 17728:2021 is regulated by Scheme-I of the BIS (Conformity Assessment) Regulations, 2018.

Manufacturers must get a BIS licence and show that they conform to the relevant Indian Standard. The process of assessing conformity generally entails:

  • The application for BIS certification is submitted.
  • An evaluation of the manufacturing and quality-control facilities.
  • Testing the product by sampling and in accordance with the applicable requirements.
  • Factory inspections and verification, if necessary.
  • The assessment of the test results and the awarding of the BIS licence.

The product manual from the BIS sets out the certification scope, the sampling guidelines, the requirements regarding test equipment, and the Scheme of Inspection and Testing; the licence scope may include tube sizes of 32 mm and 40 mm together with the relevant working-pressure ranges and other declared product characteristics.

Significance of Conformity

Adherence to IS 17728:2021 and the Agro Textiles Quality Control Order enables manufacturers to show that their products satisfy the specified requirements regarding material, construction, and performance.

Manufacturers should also keep suitable records of production and testing, put into place quality-control procedures, and make sure that the products are properly marked. According to the BIS product manual, the requirements for marking apply to tubes, fittings, and packaging, specifically including the manufacturer's identification, the product size, the working pressure, the flow rate, the length, the batch details, and the BIS licence information in question.

Timeline for BIS Certification

The time taken to secure BIS Certification for HDPE Laminated Woven Lay Flat Tube and Fittings in accordance with IS 17728:2021 will depend on the documentation, product testing, factory inspection, and the processing carried out by BIS.

As a general timeframe:

  • Indian Manufacturers: Approximately 30 days
  • Foreign Manufacturers: Approximately 180 days

The length of time actually taken will vary according to the availability of the testing facilities, the manufacturing arrangements, the completeness of the application, and any further clarifications that may be needed during the certification process.

Conclusion

HDPE laminated woven flat tubes and fittings are essential elements of rain irrigation systems since durability, flexibility, pressure resistance, and even water distribution are important in agricultural uses. The requirements necessary for the materials, construction, performance, and testing of these products are defined by IS 17728:2021.

Manufacturers, importers, and suppliers are advised to understand the Indian Standard, Agro Textiles Quality Control Order, and BIS certification requirements before they start the manufacturing, importing, supplying, and selling of such products in India. This Quality Control Order does not apply to products manufactured for export only.

Should organizations require any information regarding BIS standards and Quality Control Orders concerning the certification and requirements of the products, UMSPCS can provide them with professional help. Read more also: BIS QCO for High Density Polyethylene HDPE Geomembranes

Frequently Asked Questions (FAQs)

 

The particulars relating to manufacturing and performance of the products are covered under IS 17728:2021.

 

The products are indeed included within the scope of the Agro Textiles (Quality Control) Order, 2023, this order prescribing compliance with IS 17728:2021 and the BIS Standard Mark provided that a valid licence is held.

 

The product manual from the BIS lists two nominal tube sizes, 32 mm and 40 mm, and it is also necessary to state the applicable working-pressure range together with other product characteristics.

 

Foreign manufacturers who are eligible may apply within the relevant BIS certification framework and meet the requirements for overseas manufacturing units and Authorized Indian Representatives (AIR), if applicable.

 

The products are included in the Agro Textiles (Quality Control) Order of 2023, which was announced by the Ministry of Textiles.

 

Under the BIS Act of 2016, penalties and enforcement action may be taken against anyone who manufactures, imports, or sells covered products without the required BIS certification.

 

Our Clients

Latest Blogs and News

The tips and updates given by our company’s BIS certification consultant expert have been shared in our blogs as a trusted BIS Certificate Consultant in India.

❓ Ask a Question

Service & blog Page Form
ISO Badge
Contact Page Form