BIS ISI Certification for Hot Rolled Carbon Steel Sheet and Strip IS 1079 – A Complete Compliance Guide

What happens if the manufacturing of high-quality hot-rolled carbon steel sheets in compliance with international standards leads to a situation where they cannot be legally marketed without the needed certification in India? This means delayed launches, shipment problems, loss of money, and trouble with regulations.

In order to guarantee that the steel products offered in the Indian market comply with the necessary quality and safety standards, mandatory certification procedures have been developed by the Bureau of Indian Standards (BIS) for various steel products. One of those products that should conform to the BIS requirements prior to their introduction into the Indian market is Hot Rolled Carbon Steel Sheet and Strip IS 1079.

Acquisition of the BIS Certification for Hot Rolled Carbon Steel Sheet not only meets your legal requirements but also proves that your products conform to the recognised Indian quality standards. If you are an experienced manufacturer or wish to start the business in India, then the certification procedure needs your attention.

UMSPCS will tell you everything related to the process of BIS Registration in India, from the scope of IS 1079, products to be certified, eligibility, documentation, testing requirements, process of certification, costs, deadlines and much more.

What is BIS Certification for Hot Rolled Carbon Steel Sheet?

BIS ISI Certification for Hot Rolled Carbon Steel Sheet is an assessment program performed by the Bureau of Indian Standards (BIS), which evaluates the compliance of hot rolled carbon steel sheets and strips with the relevant requirements mentioned in the IS 1079.

Upon successful compliance with all requirements, the manufacturer receives a BIS license, thereby gaining the right to display the ISI Mark on its products. The ISI Mark provides evidence of the fact that the product has been produced under a quality management system and in accordance with Indian Standards.

For manufacturers, getting the BIS ISI Certification for Indian Manufacturers is not only a necessary step from a legislative point of view, but also an indicator of quality and reliability.

Understanding IS 1079: Standard for Hot Rolled Carbon Steel Sheet and Strip

IS 1079 is the standard for Indian Steel that lays down the technical specifications for the production of hot rolled carbon steel sheets and strips for general engineering and industrial uses.

IS 1079 provides the following technical specifications for the same:

• Chemical composition
• Mechanical properties
• Process of manufacture
• Dimensions and tolerances
• Surface finish
• Sampling procedure
• Testing procedure
• Inspection criteria
• Packaging

The main aim of IS 1079 is to make sure that high-quality steel sheets and strips are manufactured by the manufacturer for industrial use.

Products Covered Under IS 1079

IS 1079 is used for various hot-rolled carbon steel sheets which are made for industries and engineering purposes.

Some of the sheets that are generally included are:

• Hot Rolled Carbon Steel Sheets
• Commercial Quality Steel Sheets
• Drawing Quality Steel Sheets
• Structural Quality Steel Sheets
• General Engineering Steel Sheets
• Industrial Fabrication Steel Sheets
• Manufacturing Grade Steel Strips

Since they are used widely for industrial purposes, quality consistency through BIS Certification for Hot Rolled Carbon Steel Sheets is required for producers and consumers.

Why is BIS Certification Important for Hot Rolled Carbon Steel Sheets?

Steel products have extensive usage in areas that involve structures where quality directly influences safety and longevity. Any slight deviation in quality or even the composition of steel can affect its reliability.

BIS certification provides numerous benefits, such as:

• Compliance with Indian Standards
• Ensures Quality of the Product
• Gains Customers’ Trust
• Ensures Fair Market Competition
• Improves Manufacturing Process

Benefits of BIS Certification for Hot Rolled Carbon Steel Sheet

BIS Certification for Hot Rolled Carbon Steel Sheet brings substantial commercial advantages along with regulatory compliance.

• Permission to Sell Goods Legally in India
• Market Credibility
• Opportunities for Doing Business
• Quality Assurance of Products
• Competitive Edge
• Reduces Risk of Non-Compliance
• Contributes to Long-Term Business Success

Documents Required for BIS Certification for Hot Rolled Carbon Steel Sheet

Proper documentation plays an important part in securing BIS Registration in India. Complete documentation ensures that there is no delay in the process of certification.

Manufacturers have to submit:

• Basic information regarding the manufacturing plant and the product line
• Evidence of the manufacturing plant address (ownership/lease deed/utility bill, etc.)
• Certificate of trademark registration (in case the brand name has been registered)
• Licenses/approvals for the manufacturing facility (in case they apply, like pollution control and industry-specific approval)
• Drawings/schematic design of the product
• Capacity of installed manufacturing facilities
• A list of materials used along with specifications
• Details of manufacturing equipment
• Layout of the factory along with manufacturing, testing, and storage areas
• Detailed manufacturing process flow diagram is submitted
• Test Equipment and their calibration details
• Quality Control details of the personnel employed
• Organisational chart of the factory

Additional technical documents may be required by the BIS depending upon the product and the manufacturing facility.

Step-by-Step BIS Certification Process for IS 1079

BIS certification for Hot Rolled Carbon Steel Sheet requires a detailed assessment of the manufacturing process, product quality, and testing capabilities. Getting assistance from a qualified compliance consultant will enable manufacturers to successfully get through each of the steps involved.

Step 1: Identification of the Indian Standard

The first step is identification of the Indian Standard relevant to the product in question. Manufacturers of Hot Rolled Carbon Steel Sheet and Strip must make sure that their products conform to IS 1079 and make any changes to the products if needed.

Step 2: Product Testing and Documentation

The product sample is tested in a BIS-accredited and NABL-approved lab according to the provisions of IS 1079. Meanwhile, manufacturers collect all necessary technical documentation about the product and their factory and submit the BIS application.

Step 3: Submitting the BIS Application

The completed BIS application together with test results and supporting documents, including the necessary government fees, is submitted to BIS electronically.

Step 4: BIS Factory Inspection

BIS inspectors come to the manufacturing plant and assess the manufacturing process, quality control system and testing facilities. Product samples can be taken for independent testing during this procedure.

Step 5: Product Evaluation

The collected samples are then sent to a designated laboratory, and the test report is directly forwarded to BIS for assessment.

Step 6: Closure of Non-Conformities

Any observation or non-conformity, if there is one, detected during the inspection or testing process, should be rectified and the relevant documents of compliance must be furnished.

Step 7: Payment of License Fee

On satisfactory assessment, the license fee and ISI marking fee as per BIS norms are to be paid by the manufacturer.

Step 8: Awarding BIS ISI License

Upon completion of all the above processes, the ISI License is awarded by BIS to the manufacturer to affix the ISI Mark on Hot Rolled Carbon Steel Sheet & Strip products.

Applicable Tests Under IS 1079

For the purpose of meeting all the technical specifications under IS 1079, certain tests are conducted on the Hot Rolled Carbon Steel Sheet and Strip. This is done to test the quality and performance of the products.

• Chemical Composition Test
• Tensile Strength Test
• Yield Strength Test
• Elongation Test
• Bend Test
• Dimensional Verification
• Surface Quality Inspection
• Visual Inspection

What is the Cost & Timeline of BIS Certification?

The fee for BIS Registration in India does not have a set limit because the overall cost varies according to some of the factors concerning the product and manufacturing unit.

These are some of the main factors that can affect the cost of the certificate:

• BIS Application Fee
• Testing Fee of Product
• Factory Inspection Fees
• Consultancy Charges
• Annual Licence Fees

Manufacturers need to consider the certification process as an investment because it helps them comply with regulations as well as increase customers’ trust.

The time frame of this process can be between 30- 40 days, if all documentation is done correctly and the product meets the standards.

Common Challenges Manufacturers Face During BIS Certification

Despite a clear definition of the procedure, there are some practical difficulties which, if ignored, may cause delays in obtaining the certificate.

1. Deficiencies in the Documents: The lack or incompleteness of documentation is one of the most typical causes of delay in the examination of an application.
2. Failure of Tests: In case product samples do not comply with the requirements established by IS 1079, manufacturers should change their manufacturing process and conduct the test again.
3. Problems in Quality Control: Inconsistency of inspections, production processes or documentation may have an impact on the result of the inspection of the factory by BIS.
4. Lack of Knowledge about BIS Regulations: It is difficult to imagine that many manufacturers do not know about BIS regulations, standards and document requirements.
5. Delay in the BIS Factory Inspection: Scheduling of inspection depends both on the BIS availability and on the preparation of the application. Correct planning will help to avoid delays.
6. Changes in Regulations: To ensure compliance with all requirements, manufacturers should be aware of changes in the Indian Standards, QCOs, and BIS guidelines.

Why Choose UMSPCS for BIS Certification for Hot Rolled Carbon Steel Sheet?

Acquisition of BIS Certification for Hot Rolled Carbon Steel Sheet is more than filling out an application. It requires manufacturers to follow all aspects of IS 1079, develop relevant documentation, arrange product testing, answer queries from the BIS, and pass the factory inspection. Even a little mistake may cause further delays, extra costs, or rejection of the application.

UMSPCS has gained its reputation as a professional consultancy for BIS Registration in India, working in the industry for 6 years with 600+ product compliance projects completed. We cooperate with manufacturers and make sure that the certification is easy, but at the same time, we guarantee full compliance with the BIS requirements.

Our BIS Certification Services include:

• Complete consulting in obtaining BIS ISI Certification for Indian Manufacturers
• Checking whether the product falls under the scope of IS 1079
• Development of the relevant documentation
• Cooperation with BIS-approved laboratories for product testing
• Help in developing quality control/testing methods
• Support during BIS Factory Inspection
• Answering BIS’s questions and observations
• Maintenance of the license after certification

UMSPCS is interested in accelerating the certification process for our clients and minimising the risks of non-compliance.

Conclusion

In view of the ever-increasing demand for quality certified steel products, it has now become mandatory for manufacturers to meet the Indian regulatory requirements. In addition to ensuring compliance with the relevant Indian Standard, BIS Certification for Hot Rolled Carbon Steel Sheet under IS 1079 also helps to improve the credibility of the product, build customer trust and create new business prospects in the Indian market.

Right from the stage of comprehending the standard and documentation through testing of products and plant inspections. The whole procedure for certification needs to be handled meticulously. It is always a good idea to go in for an experienced compliance partner to ensure that there are no unnecessary delays in the whole process of approval.

Should you be considering obtaining BIS Registration for Hot Rolled Carbon Steel Sheet and Strip in India, UMSPCS is ready to provide all the assistance you may need.

Get in touch with UMSPCS now for expert assistance with documentation, testing, factory inspection and complete BIS Certification services.

Read more about: BIS CRS Certification for Digital Television Receivers – IS 18112

FAQs

1. Is BIS Certification Mandatory for Hot Rolled Carbon Steel Sheet and Strip?

Yes, in case the product is covered by the appropriate Quality Control Order (QCO), it becomes mandatory to obtain BIS Certification for Hot Rolled Carbon Steel Sheet before the manufacturing, selling or distribution of the product in India.

2. What Indian Standard is relevant to Hot Rolled Carbon Steel Sheet and Strip?

The relevant Indian Standard in respect of the product is IS 1079, which provides for quality, technical and testing criteria for Hot Rolled Carbon Steel Sheet and Strip suitable for general engineering purposes.

3. Who are eligible to apply for BIS ISI Certification for Indian Manufacturers?

Eligible manufacturers of Hot Rolled Carbon Steel Sheet and Strip in accordance with IS 1079 and possessing the necessary manufacturing and quality control facilities may apply for BIS ISI Certification for Indian Manufacturers.

4. What are the Documents Required for BIS Certification?

The documents required by BIS for certification usually include business registration documents, testing facility details, technical specifications, etc.

5. What is the time taken to get BIS certification for Hot Rolled Carbon Steel Sheet?

It generally takes 30 – 40 days for the certification process to be completed, based on document preparation, product testing, inspection schedule, and other BIS processes.

6. What determines the BIS certification cost?

There are various aspects that determine the certification cost, such as BIS Application Fee, Testing Charges for products, Inspection Fee, Consulting Fee, Annual Licence Fee, and others.