BIS Certification for Hot rolled Steel Strip For Welded Tubes And Pipes: Complete Guide

Steel strip hot rolled finds its usage in many sectors, including automobiles, industrial equipment, welded pipes, and engineering sectors, due to its strength and performance. But if these products do not meet the standard needed, it not only causes manufacturing defects but also poses a security problem as well as financial losses.

The Bureau of Indian Standards (BIS) has set the standards for Hot-Rolled Steel Strip for different industrial applications with IS 10748 for uniformity and quality. All manufacturers are required to get the BIS Certification for Hot rolled Steel Strip For Welded Tubes And Pipes for the marketing of their products in India.

It is important for you to know about the Certification Process by BIS, whether you are an Indian manufacturer seeking BIS ISI Certification for Indian Manufacturers or a foreign entity seeking BIS Certification for foreign manufacturers.

This guide provides all details of BIS Certification for Hot Rolled Steel Strip IS 10748 with all applicable standards, covered products, certification process, documents required, testing requirements, cost, time, challenges, and how UMSPCS can help.

Understanding IS 10748 for Hot-Rolled Steel Strip

The Indian Standard IS 10748 has been issued by the Bureau of Indian Standards for Hot-Rolled (HR) Steel Strip. Requirements for manufacturing, chemical composition, dimensions, mechanical properties, tolerances, and testing procedure are specified.

Its aim is to ensure that hot rolled steel strips, which are made and shipped in India, have quality standards established and will ensure that they will reliably meet the requirements of different industrial processes.

If the product conforms to IS 10748, it means that the product has been produced in compliance with the quality recognised standards and can be used as intended.

Products Covered Under IS 10748

The standard is applicable to hot-rolled steel strips for many different industrial and manufacturing applications.

Applications commonly include:

• Welded tubes/pipes
• Automotive components
• Engineering products
• Industrial equipment
• Fabricated metal products
• Structural applications
• General manufacturing industries

Manufacturers of hot-rolled steel strips need to verify compliance with BIS requirements before they can supply hot-rolled steel strips in the Indian market, if their product is covered by IS 10748.

Why BIS Certification for Hot rolled Steel Strip For Welded Tubes And Pipes Is Important

The manufacturer of Hot-Rolled Steel Strip covered under the relevant Quality Control Order (QCO) must have it certified by the Bureau of Indian Standards (BIS). This validates the product against the quality, safety and performance parameters specified in IS 10748.

Apart from meeting regulatory requirements, BIS Certification for Hot rolled Steel Strip For Welded Tubes And Pipes IS 10748 gives manufacturers market acceptance, customer trust and also enables manufacturers to legally sell products in the Indian market. The ISI mark is also allowed under the certification, which ensures that it meets the standards laid down in India.

Without certification:

• Products are restricted for sale in India
• There might be limited government procurement opportunities
• Imports could be subject to regulation
• Businesses may face fines for not conforming

So, it is critical for businesses to obtain BIS Certification for Hot-Rolled Steel Strip to remain legal and expand their business.

Benefits of BIS Certification for Hot-Rolled Steel Strip

This certification can offer manufacturers a number of advantages:

• Access to the Indian market (legally)
• Increased customer confidence
• Stronger brand recognition
• Enhanced quality control in the product
• Aluminium hydrolysis and the production of light metals
• The criteria for getting access to a government procurement contract
• Reduced compliance risks
• Enhanced business opportunities

Which BIS Certification Scheme Applies?

The certification route will be different based on the place of the manufacturing facility.

1. BIS ISI Certification for Indian Manufacturers

The manufacturers in India should be certified with BIS under Scheme I. On successful approval, they are given the authorization to use the ISI Mark on their certified products.

2. BIS Certification for Foreign Manufacturers

Any foreign manufacturer who wishes to export Hot-Rolled Steel Strip to India needs to apply under the Foreign Manufacturers Certification Scheme (FMCS).

Under FMCS, the manufacturers are required to:

• Follow the requirements of IS 10748
• Undergo factory inspection
• Complete product testing
• Levie is an Authorised Indian Representative (AIR)

Testing Requirements for Hot-Rolled Steel Strip

One of the crucial phases of the certification process is product testing. Testing generally includes:

• Chemical Composition Testing
• Mechanical Property Testing
• Dimensional Verification
• Surface Quality Inspection
• Bend and test carefully

Before any products can be certified, they must comply with all prescribed tests.

Documents Required for BIS ISI Registration in India

Good documentation plays a crucial role in the successful certification process.

• Basic information about the manufacturing unit and the product sector (segment)
• Proof of manufacturing unit address (ownership/lease deed, utility bill, etc.)
• Trademark Registration Certificate (in case it is a brand name referred to and registered for a trademark)
• Pollution Control Instruments and Equipment
• Some common qualifications found in a variety of industries or applications (such as control and industry-specific)
• Product drawings/design schematics
• Installed manufacturing capacity
• Write down the list of materials used and the specifications
• Specifics of the manufacture of machinery and equipment
• Plan the layout of the factory, including production and testing areas and storage areas
• A very detailed manufacturing process of the flow chart is provided
• In-house Test Equipment and calibration information
• Quality control staff details
• Factory organisational chart

Having accurate details in the logs reduces delays in BIS processes.

Step-by-Step Process BIS Certification for Hot rolled Steel Strip For Welded Tubes And Pipes

The time taken for the BIS ISI certification process is around 30-40 working days from the product being sent for testing and inspection by the manufacturer, and upon non-conformance, the certification process is completed.

The following are the steps, but in a more professional and blogger-friendly way:

Step 1: Standard Identification and Product Assessment

It is very critical to determine the appropriate IS code for that specific product, if the certification is to take place. Hence, it is imperative that the manufacturer makes sure that their product meets the standards specified by BIS.

This stage includes:

• Once the Indian Standard is determined (by any means it may be)
• For product specifications, please refer to the specifications below
• Compliance obligations – making sure they’ve been assessed
• Improve the production capacity assessment

Step 2: Product Testing and Documentation Preparation

The product should be tested in a lab recognised by BIS and NABL. Meanwhile, documents are prepared in accordance with the Standards on the technical aspects and manufacturing of the specific products used in the certification application.

The stage involves:

• Product Sample Testing
• Technical Doc Preparation
• Information Collection, creating the factory
• Document conservation for the application

Step 3: BIS Application Submittance

After all the processes of testing, documentation, etc., are completed, the Application is submittable to BIS, accompanied by relevant documents and prescribed fees.

The standard application will involve:

• Product Test Report
• Information about the factory and manufacturers is included.
• Technical Documents
• Government Applicable Fees

After receiving the application, the BIS will review it to ensure that it is complete and meets the standards.

Step 4: BIS Inspection of the Manufacturer’s Plant

An authorized person from the BIS will visit the manufacturer’s factory to confirm its compliance and ability to manufacture it regularly.

During the inspection, BIS makes an assessment on:

• Manufacturing processes
• Production infrastructure
• Quality control systems
• In-house testing facilities

You can also have samples of the product taken for your independent verification.

Step 5: Laboratory Evaluation and Report Submission

Samples taken at inspection are analysed at authorised laboratories. After testing, the report will be submitted to the lab, which will submit test reports and also provide a report for technical evaluation directly to BIS.

This stage includes:

• Sample evaluation
• Laboratory testing
• Compliance verification
• Reports of the tests must be submitted to BIS.

Step 6: Closure of Non-Conformities

If they are discovered during the test/inspection process, corrective action (full action plan) must be implemented to be approved.

This may involve:

• Addressing compliance gaps
• Implementing corrective measures
• Submitting revised documents
• To work on technical details (optional)

Step 7: Payment of Licence and Marking Fees

If they pass their performance test, the manufacturer will have to pay the necessary BIS fees for the manufacturer to receive a licence.

These generally include:

• Licence fee
• ISI marking fee
• Any other charges that apply (if applicable)

Step 8: Grant of ISI Licence

After a successful test and documentation review, and payment of fees, BIS issues the certificate license.

Thereafter, the manufacturer is allowed to put the ISI Mark on the products certified by them, which would certify that they comply with the applicable Indian Standards and BIS requirements.

Cost of BIS Certification for Hot-Rolled Steel Strip

The overall cost of certification will vary according to:

• Product variants
• Scope of testing
• Factory inspection requirements
• Government fees

Before you know how much you will actually have to spend for the certification, an in-depth analysis should be carried out.

Common Problems Encountered by Manufacturers

Many problems can arise when manufacturing, such as:

• Wrong Documentation: Incomplete or inaccurate documentation can slow down the approval. 
• Testing Non Conformities: If the products do not pass the tests, they will need to be retested, which could subsequently cause a CAX.
• Requires adequate Quality Control and Testing facilities of the manufacturer, Factory Audit Preparation.
• Responding to BIS Queries: Prompt action and technical understanding needed for Regulatory Communication.
• FMCS Compliance Requirements: Foreign manufacturers have to take care of their AIR appointments, inspections, and extra compliance requirements.

With expert advice, these problems and approval procedures can be prevented and shortened.

Why Choose UMSPCS for BIS Certification for Hot-Rolled Steel Strip?

UMSPCS has experience in 600+ successful compliance projects, assisting manufacturers in efficiently navigating BIS’s requirements.

• Complete End-to-End certification Support: We take care of the entire certification process.
• Documentation Assistance: We put out all the documents required and reviewed them.
• Testing Coordination: Coordination of testing with the recognised laboratories.
• HELP Manufacturers with Factory Audit Support for a smooth BIS Inspection.
• On Indian & Foreign Manufacturers: We can help with any certification requirements with domestic and overseas manufacturers.
• Fast and Efficient Approvals: We work quickly and efficiently to get your approval.

Interested in getting BIS Certification for Hot-Rolled Steel Strip?

The manufacturing industry and infrastructure development in India are growing, and hence, some of the different types of certified steel products are in demand.  Manufacturing BIS Certification for Hot-Rolled Steel Strip under IS 10748 allows manufacturers to showcase their product quality, product compliance and provide them with better credibility.

Whether you require BIS ISI certification for Indian Manufacturers, BIS certification for foreign manufacturers, or assistance with BIS ISI registration in India, UMSPCS provides complete support throughout the certification journey.

Reliable products and confidence are now available on the Indian market, ensuring your BIS certification is easy. Contact UMSPCS today to know more.

Read more about: BIS Certification Trends Impacting South Korean Exporters 2026

FAQs

1. Is BIS Certification of Hot-Rolled Steel Strip Compulsory in India?

Yes, every manufacturer who wants to sell their Hot-Rolled Steel Strip in India will need to obtain the BIS certificate, and they will require marking their Hot-Rolled Steel Strip with the ISI Mark.

2. Which one of the following is not needed for BIS Certification of Hot-Rolled Steel Strip?

Indian Standard IS 10748 is applicable to Hot Rolled Steel Strip.

3. Can foreign companies obtain BIS Certification for Hot-Rolled Steel Strip?

Yes, the Foreign Manufacturers Certification Scheme (FMCS) is available to allow overseas manufacturers to apply and have an Authorised Indian Representative.

4. How much time will it take to get registered BIS ISI for Hot-Rolled Steel Strip in India? 

Certification takes 6-12 weeks on average, depending on test, paper and inspection requirements.

5. How many Inspection Documents are needed for BIS Certification with regard to Hot-Rolled Steel Strip?

Typically, the manufacturers require the company registration documents, manufacturing data, product specifications, quality records and all technical files relevant to the product.