Successfully entering India requires more than an excellent product. It takes deep knowledge of India’s product standards, certification, and testing systems, as well as the various Quality Control Orders (QCOs). A product that meets international quality standards may still need BIS approval to be manufactured, imported, and sold in India.
This is when the importance of BIS certification consultancy comes into the picture.
Being an Indian manufacturer and obtaining the ISI mark; being an electronics manufacturer and seeking CRS registration; and being a foreign manufacturer wanting to export to India and understanding the certification process, involving different procedures, documentation, laboratories, and regulations – these are some scenarios where consultancies come into the picture.
Consultancies such as UMSPCS provide compliance assistance to both domestic and international manufacturers across multiple BIS certification schemes, including ISI, CRS, and FMCS.
Rather than just assisting in application processing, the right consultancy helps manufacturers identify the applicable Indian standard, understand certification requirements and obligations, and assist in the preparation of required documents, test coordination, technical query resolution, and assistance in the certification process.
It is important to understand the working of BIS certification, the need for the same, and the type of manufacturers that require a BIS compliance partner before choosing a BIS compliance partner.
Understanding BIS Certification: Why Do Manufacturers Need It?
The Bureau of Indian Standards (BIS) is India’s national standards body, responsible for developing Indian Standards and operating conformity assessment and certification schemes.
Manufacturers must demonstrate to the BIS that their products comply with the concerned Indian Standard (IS) to use the BIS standard mark or to place products within the scope of mandatory certification in the Indian market.
BIS certification is voluntary in nature. However, the Central Government can issue Quality Control Orders (QCOs) to make product certification mandatory.
According to BIS, the introduction of mandatory product certification is justified for public health and safety, protection of the environment, and elimination of unfair trade practices.
Before undertaking the process of obtaining a BIS certification, manufacturers need to evaluate the following three issues.
- Does their product require mandatory BIS certification?
- Which Indian Standard is relevant to their product?
- Which scheme of conformity assessment is applicable?
A BIS certification consultant helps manufacturers evaluate the aforementioned requirements before investing time and money in product tests and application processes.
Basic Requirements for both Indian and Foreign Manufacturers
Though there are differences in process, both Indian and foreign manufacturers need to show that their products are compliant with the Indian Standards concerned.
Requirements for Indian Manufacturers
- A valid business registration and manufacturing address.
- The concerned Indian Standard and product specifications.
- Proper manufacturing machinery and equipment.
- Testing equipment and quality-control infrastructure.
- Product samples for tests.
- Records of manufacturing process and quality control.
- Mature technical and managerial competence and authorised signatories.
Read more also: BIS ISI Certification for Indian Manufacturers
Requirements for Foreign Manufacturers
In addition to those requirements applicable to Indian manufacturers, foreign manufacturers applying under the Foreign Manufacturers’ Certificate of Conformity Scheme (FMCS) also need to have:
- A manufacturing facility outside India.
- Machinery and facilities for production, testing and quality control as required by the scheme concerned.
- Products conforming to the concerned Indian Standard.
- Nomination of an Authorized Indian Representative (AIR).
- Acceptance of the applicable Scheme of Inspection and Testing (SIT).
- Compliance with the conditions of the BIS license and fulfillment of the marking fee requirements.
BIS requires individual applications for each applicable product/Indian Standard and for each location of manufacture under the Factory Manufacture of Control of Specification (FMCS) scheme. Read more also: BIS Certificate for Foreign Manufacture
BIS Certification Procedure: From Standard Identification to Approval
The certification procedure is determined by the category of the product and the conformity assessment scheme applicable. Generally, consultants guide the manufacturers through the following stages.
1. Identification of the Product and the Standard
Identify the product category, Indian Standard, and the Quality Control Organization (QCO). Check if certification is mandatory. In case it is mandatory, determine if the product falls under ISI, CRS, FMCS, or other BIS schemes.
2. Preparation of Documents
Based on the identification of the product and standard, manufacturing, business, and other related documentation are prepared. In case of foreign manufacture, AIR nomination and related documentation are prepared.
3. Product Testing
Arrange product testing in a laboratory as per the Indian Standard and scheme requirements.
- ISI: Product samples are tested as required in the certification procedure.
- CRS: Testing is to be done in a BIS-recognized laboratory, and the test report is to be submitted along with the application.
- FMCS: BIS conducts factory assessment and sample testing.
4. Online Application
Submit the application along with required documents and fee through the respective BIS portal.
5. BIS scrutiny and inspection
BIS reviews the application and raises queries if required. In case assessment of the factory is required, it is done by BIS.
Step 6: Compliance and Approval
BIS grants the license or registration upon completion of an evaluation of the submitted data.
If observations are made, the agency issues a correspondence and requires additional information or fulfilment of requirements before the grant of the license or registration.
A consultancy firm facilitates these activities but does not issue a BIS certificate independently.
Documents Required for BIS Certification
The requirements of documentation may vary based on the product, location of the manufacturing unit, and the certification scheme. Based on experience, the following are some of the general requirements for BIS certification.
- Basic information on the product category and manufacturing unit
- Test report as per the Indian Standard by an authorised laboratory
- Proof of ownership of the manufacturing plant
- Trademark
- Licenses and approvals from statutory authorities
- Raw material data
- Process flowchart
- Packaging
- List and calibration of test and measuring equipment
- Data of quality control personnel
- Process of disposal of substandard products
- Organisation chart and layout of the manufacturing plant
Additional documents required for foreign manufacturers:
- Appointment letter of the Authorized Indian Representative (AIR)
- Documents of overseas factory
- Undertaking and affidavit in the format of BIS
For FMCS, BIS also requires other information depending on the circumstances, e.g., manufacturer’s technical file, outsourced manufacturing, and other testing arrangements.
How Much Time Does BIS Certification Take?
It varies based on the certification scheme, product complexity, and the scheme, and the availability of testing and inspecting facilities, and the completeness of the application.
Planners should find the following references useful based on BIS-published processing information:
| Certification scheme | Indicative timeline |
| BIS ISI Certification | Around 1 – 4 months under the two application options mentioned in BIS FAQs |
| BIS CRS Registration | Normally 20 working days |
| BIS FMCS Certification | Generally around 6 months |
These time periods are approximations, and completion times may vary. The BIS has noted that delays can occur due to incomplete applications, unanswered queries, inspection arrangements, sample submissions, pending payments, etc.
Validity and Renewal for BIS approval
Once certification is granted, other obligations remain. Throughout the period of the license/registration, products must continue to comply with the applicable requirements.
- ISI Certification: Granted for a period of up to 2 years under Scheme-I, and subsequently renewable for a period of up to 5 years, subject to the applicable requirements.
- CRS Registration: Granted for a period of two years and subsequently renewable under the published CRS instructions.
- FMCS Certification: Granted for a period of one to two years, and subsequently renewable for a period of up to five years, subject to the applicable requirements.
During the period of validity and renewal, other obligations exist as well, including product quality, marking, payment of fees, and compliance with conditions of surveillance.
Common Problems Faced by Indian and Foreign Manufacturers
BIS certification can be difficult to obtain, even for established manufacturers. Challenges can include:
- Misidentification of standard
- Test failure
- Documentation issues
- Readiness of the factory
- AIR-related requirements
- Regulatory changes
- Post-certification requirements
Engaging a BIS compliance consultant with ample experience can help manufacturers identify such issues and devise an appropriate compliance strategy.
How UMSPCS Helps Indian and International Manufacturers Obtain BIS Certification
Finding a BIS consultancy that understands both local and global certification requirements simplifies the entire compliance journey.
UMSPCS understands product compliance with 6+ Years of Compliance Experience and exposure to 600+ product compliance requirements across multiple industries.
We offer assistance for;
- Product and Regulatory Assessment
- BIS Application and Documentation Support
- Testing Lab Coordination
- Factory Inspection Support
- Assistance to Foreign Manufacturers
- Compliance After Certification
Based on the product and regulatory requirements, UMSPCS offers structured assistance for various BIS certifications. BIS ISI Certification for Indian Manufacturers, BIS CRS Certification for Electronics, and BIS Certification for Foreign Manufacturers.
Conclusion
Although BIS certification is necessary for manufacturers who intend to market their products in India, the process is not uniform for all manufacturers. Indian manufacturers, foreign manufacturers, and manufacturers of electronics have to follow different procedures for certification based on the products they produce and the regulatory schemes applicable to them.
For ease of compliance, a consultancy that is familiar with ISI certification, CRS registration, FMCS, product testing, and regulatory documentation would be most helpful.
At UMSPCS, we know the Indian and international requirements and help manufacturers comply with BIS regulatory requirements, prepare the required documentation, organize product testing, and assist with other related services.
Are you a manufacturer wanting to sell your product in India? Connect with UMSPCS and book your free consultation.
Read more also: What Does It Take to Get BIS Approval for Flux-Cored Electrodes
FAQs
- Which BIS certification consultancy handles Indian as well as foreign manufacturers?
UMSPCS handles BIS consultancy for both Indian and foreign manufacturers and offers services related to ISI certification, CRS registration, and FMCS.
- Is there a single BIS consultancy that covers all three, i.e., BIS ISI, CRS, and FMCS certification?
Yes, A BIS consultancy with experience in different schemes can cover all three certifications for manufacturers based on the product and applicable regulations.
- Is it mandatory to get BIS certification for selling all products in India?
No, BIS certification is usually voluntary. However, it becomes mandatory for products notified under Quality Control Orders (QCOs) and other government notifications.
- What is the difference between ISI certification and CRS registration?
Generally, ISI certification is covered under Scheme-I, which requires product testing as well as assessment of the factory. CRS, on the other hand, is covered under Scheme-II and involves product testing by BIS-recognized labs, followed by registration.
- Are foreign manufacturers allowed to apply for BIS certification?
Yes, foreign manufacturers are allowed to apply for BIS certification under the schemes applicable to them.
- Is it always required to appoint an AIR for foreign manufacturers?
Foreign applicants who do not have a liaison or branch office in India need to appoint an AIR as per the conditions of the applicable BIS scheme.
❓ Ask a Question
Have any doubts? Fill the form below and our team will respond shortly.

