UMSPCS-Compliance

Top Consultancies for BIS FMCS Application Support in India: A Complete Guide for Foreign Manufacturers

Top Consultancies for BIS FMCS Application Support in India

Opening up the Indian market creates business opportunities for manufacturers across the world. However, it is not without its challenges. One of the first hurdles for manufacturers trying to enter the Indian market is navigating India’s regulations. For a product to be manufactured in India and imported to India for further sale, it may require separate approval, in addition to meeting international standards.

This is where BIS FMCS comes into the picture. BIS develops and publishes technical standards to enable producers and stakeholders to identify the quality and safety of a product. The process for obtaining a BIS license and using the Standard Mark involves a number of procedural and technical requirements.

Many foreign manufacturers are not familiar with India’s process for compliance. Therefore, applying for BIS FMCS on their own can be a daunting task. An experienced BIS consultant for foreign manufacturers can not only simplify, but also organize the whole process for them. The right consultant helps their clients understand the applicable norms, assists in the preparation of documents, coordinates with testing laboratories, and addresses queries from BIS.

This blog covers the important factors to consider while selecting a consultancy for FMCS application support, the requirements for certification, process, cost, time, and finally, the steps we take to assist foreign manufacturers to obtain BIS certification in India for their products.

A Comprehensive Guide to BIS FMCS for Foreign Manufacturers

The scheme functions under the aegis of the Bureau of Indian Standards Act, 2016, and BIS (Conformity Assessment) Regulations, 2018.

FMCS entails extra conditions for foreign applicants. These include the nomination of an Authorised Indian Representative (AIR) and assessment of the manufacturing facilities situated outside India.

The following points merit consideration:

  • An application is required to be submitted by the foreign manufacturer and not by the Indian importer.
  • A separate application is required for each product/Indian Standard and for each manufacturing location.
  • The applicant manufacturer must have the required production and test facilities.
  • The AIR is to be nominated in India.
  • BIS undertakes factory assessments and requires product testing to be carried out at a recognised laboratory.

Top Consultancies for BIS FMCS Application Support: What Should You Look For?

Coordination of several stakeholders spread across countries and time zones adds to the complexity of FMCS.

There is no official ranking of BIS-recognized private FMCS consultancies. Thus, from the perspective of the end-user, the most important consideration for evaluation of service providers is their experience and knowledge in foreign manufacturer certification, technical transparency, and ability to manage the entire certification process.

The key areas to be covered while selecting a BIS FMCS consultant in India include:

  • Experience in foreign manufacturer certification
  • In-depth knowledge of Indian Standards and Quality Control Orders (QCOs)
  • Support during the process of documentation and evaluation
  • Coordination with BIS and factory assessment
  • Coordination with laboratories for testing and other services
  • Post-certification services

BIS FMCS Certification: Important Requirements and Factory Procedures

Foreign manufacturers wishing to apply for BIS FMCS certification must ensure their production facility meets the requirements of BIS.

The important requirements are:

  • Manufacturing Facility
  • Product Conformity
  • Machinery
  • In-house Testing
  • Technical Personnel
  • Authorized Indian Representative
  • Scheme Acceptance

Usually, a separate application is required for each product / Indian Standard and for each manufacturing premises.

Documents Required for BIS Certification for Foreign Manufacturers

The documentation process is one of the key components of FMCS registration. Inadequate or poor records can result in queries and delays.

Generally, foreign manufacturers must provide the following documents:

  • Basic information about the factory and the product category
  • Test report by BIS/NABL recognized lab as per the Indian Standard
  • Documentary evidence of ownership of the factory (ownership deed, utility bill, etc.)
  • Registration certificate of trademark
  • Licenses/approvals of statutory authorities
  • Product design drawing/schematics
  • Manufacturing capacity
  • Data about raw materials
  • Specification and list of manufacturing machines
  • Manufacturing process flowchart
  • Product packaging
  • Process of packaging
  • List of calibrated test equipment in the manufacturing unit
  • Quality Control staff
  • Process of disposal of sub-standard products
  • Layout of the manufacturing unit
  • Organizational chart of the factory

Other documents of Foreign Manufacturers:

  • Appointment letter of Authorized Indian Representative (AIR)
  • Overseas factory documents/layout/machines and Quality Control
  • Undertaking as per BIS format

End-to-End BIS FMCS Application Process in India

Bureau of Indian Standards (BIS) Certification process for foreign manufacturers consists of several steps from locating the appropriate standard to receiving final license.

Step 1: Application Submission

Preparation of requisite documents, filling out the prescribed application forms of BIS, and payment of the requisite application fee.

  • Allocation of application number by BIS.
  • First-level scrutiny of the application by the officers of BIS.

Step 2: BIS Query Handling

Once BIS reviews the application, queries may be raised in respect of compliance-related issues such as, but not limited to, absence of required documents or submissions containing incorrect information. The foreign manufacturer is required to submit clarifications and the supporting documents within the stipulated time.

Step 3: Factory Inspection (Audit)

A BIS official travels to the manufacturing facility to verify compliance with the requirements of the Indian Standard.

The inspection covers, but is not limited to:

  • Manufacturing machines
  • Production processes
  • Quality control
  • Testing facilities
  • Procedures and capabilities to comply with the requirements of the Indian Standard.

Step 4: Product Sample Testing

During a factory inspection, product samples are collected and sealed to verify conformity with the Indian Standard.

  • Collection and sealing of product samples
  • Testing of samples by a BIS-recognized laboratory
  • Submission of test report to BIS

Step 5: Grant of BIS Licence

If all certification requirements are satisfied and the product meets the requirements of the Indian Standard, the BIS grants the licence.

This step includes:

  • Approval of BIS for grant of licence
  • Payment of license fee and marking fee
  • Right to use the ISI mark on the product

Step 6: Indemnity Bond and Performance Bank Guarantee (PBG)

The foreign manufacturer is required to complete a set of legal and financial requirements prior to issuance of the BIS license.

This includes:

  • A signed indemnity bond by the AIR
  • A Performance Bank Guarantee (PBG) of 10,000 USD

Once these preliminary procedures are completed and BIS is satisfied with the compliance requirements, the license is granted to the foreign manufacturer.

Cost of BIS FMCS Certification for Foreign Manufacturers

The cost of BIS Certification for foreign manufacturers depends upon the product category, level of testing, inspections, and travel expenses.

 

ParticularsEstimated Cost (USD)
BIS Application Fees$12.00
BIS Officers’ Per Diem (3 Days)$900.00
Factory Visit Charges$466.66
Contingency Funds$111.11
Travel and Visa Expenses$2,173.00
Minimum Marking Fee$2,744.00
Sample Testing$400 – $3,000
Total Estimated Cost$6,850.77 – $10,000.77

Timeline for BIS FMCS Certification

The BIS FMCS certification process takes 5 to 6 months on average for foreign manufacturers. The timeline may change depending upon the stage at which the application for certification is submitted, whether BIS raises queries, timely completion of overseas factory inspection, evaluation and reporting of the test results, the grant of approval, and the issuance of the license. 

Delays in the coordination of documents, inspections and test result reports may also lead to the extension of this period.

Common Problems Faced by Foreign Manufacturers while Seeking FMCS

Various problems may be faced by a foreign manufacturer, even a multi-national company, while seeking BIS certification. The problems may include:

  • The manufacturer selects the incorrect IS code
  • Documents submitted by the manufacturer contain inconsistencies
  • The manufacturer does not have the facilities to perform the tests
  • AIR-related problems
  • International inspection coordination
  • Tests and reports fail
  • Sudden changes in regulations.

The BIS FMCS certification process is complicated and comprises numerous steps. Therefore, manufacturers may take the help of professionals to identify and overcome the challenges stated above.

What UMSPCS Offers to Foreign Manufacturers for BIS FMCS Certification

A trustworthy compliance consultancy can ease the process of obtaining BIS certification for foreign manufacturers. We provide complete support to foreign manufacturers for obtaining Indian product regulatory approvals and certifications.

UMSPCS has 6+ years of experience handling 600+ product compliance requirements of different industries and supports manufacturers at different stages of product certification.

We, at UMSPCS, support our clients in:

  • Identifying product requirements and applicable standards
  • Filling out the application form
  • Nomination of AIR (if applicable)
  • Completing technical documentation
  • Arranging for factory inspection
  • Liaising with test labs
  • Resolving queries
  • Support after certification

We aim to make the process of obtaining BIS certification for foreign manufacturers easy and hassle-free. Read more also: BIS ISI Certification for Indian Manufacturers

Conclusion

BIS licence through FMCS is a prerequisite for foreign manufacturers to enter regulated product markets in India. Right from choosing the applicable Indian standard to preparing technical documents, arranging for factory inspections, and coordinating with test labs, everything requires detailed and thorough process management.

Choosing the right BIS consultants for foreign manufacturers lessens errors in documents, improves factory readiness, and simplifies process management.

UMSPCS does the same for overseas manufacturers and simplifies the process of getting product certifications.

If you are a foreign manufacturer interested in getting BIS FMCS certification for your products, reach out to us for a hassle-free experience!

Read more also: Why Does Microfine OPC Need BIS ISI Certification?

FAQs

  1. What is BIS FMCS certification for foreign manufacturers?

FMCS is a BIS certification scheme that allows foreign manufacturers to obtain a license to use the BIS Standard Mark on products that conform to the applicable Indian Standards.

  1. Who can apply for BIS FMCS certification in India?

Manufacturers having their production facilities outside India can apply if they satisfy the applicable manufacturing, testing, quality control, and AIR requirements.

  1. Is BIS certification mandatory for foreign manufacturers exporting to India?

It is mandatory only for products that are covered under an applicable compulsory QCO/certification. The product category should be checked prior to export to India.

  1. Is an Authorized Indian Representative mandatory for FMCS?

Yes, foreign manufacturers must appoint an eligible Indian resident as their AIR to fulfill the requirements.

  1. Can an Indian importer apply for BIS FMCS certification?

No, only foreign manufacturers can apply for FMCS. An Indian importer may be eligible for nomination as AIR, based on the BIS conditions.

  1. Can foreign manufacturers get BIS certification without factory inspection?

In most cases, no. FMCS process involves assessment of manufacturing facilities outside India, via production and testing.

❓ Ask a Question

Have any doubts? Fill the form below and our team will respond shortly.

Service & blog Page Form
ISO Badge
Contact Page Form