UMSPCS-Compliance

How Can Helmet Manufacturers Ensure Compliance with BIS ISI Certification Requirements?

Riding a two-wheeler without a helmet puts the life of the rider at risk. The role of a helmet in preventing an injury to the head of a rider is well-known. The safety of the rider and prevention of head injuries depend not only on the rider wearing a helmet but also on the quality of the helmet and its ability to withstand an impact, the strength of the retention system, and the overall design and construction of the helmet. Therefore, the work of a helmet manufacturer extends beyond the design and construction of a helmet that satisfies the demand of the market.

Manufacturers interested in the Indian market must ensure that their products meet the safety standards applicable in India. BIS ISI certification for helmets is mandatory for manufacturers under the applicable Quality Control Order. Helmet manufacturers need to demonstrate that their helmets meet the requirements of the Indian standard applicable to them and obtain a BIS license before they are allowed to affix the ISI standard mark on their product and sell it in India.

There are different procedures that helmet manufacturers need to go through and a number of things that they need to do in order to comply with the law. They include, but are not limited to, understanding IS 4151:2015, product testing, preparing factory infrastructure, and obtaining the BIS license.

This blog has provided an overview of what is required of helmet manufacturers to comply with the BIS ISI Certification process.

What is the Importance of BIS ISI Certification for Two-Wheeler Helmets?

The Indian government issued the Helmet for Riders of Two-Wheeler Motor Vehicles (Quality Control) Order, 2020, to ensure the safety of riders of two-wheeler motor vehicles by regulating the quality and safety of helmets.

The order was issued on 26th November, 2020, and came into effect on 1st June, 2021.

Under this order,

  • Helmets for two-wheeler motor vehicle riders shall conform to Indian Standard (IS) 4151:2015, Protective Helmets for Two-wheeler Riders.
  • Such products shall be marked with the BIS (ISI) Standard Mark in accordance with a licence issued to them.
  • Certification is granted under Scheme-I of Schedule-II of the BIS (Conformity Assessment) Regulations, 2018.
  • BIS is the designated Certification and Enforcement Authority.
  • This Order shall not apply to goods manufactured or produced in India and intended for export.

Therefore, BIS Certification is mandatory for helmets manufactured to be marketed in India.

What Must a Helmet Manufacturer Have in Place Before Applying?

There are certain prerequisites to obtaining a BIS licence, and these are evaluated by BIS. The applicant has to demonstrate that it is capable of producing helmets that conform to the concerned Indian Standard.

BIS ISI Certification evaluates helmets against relevant Indian Standards, reviews the latest amendments and revisions, evaluates product conformity, and verifies the compliance of documents and traceability.

These prerequisites help BIS evaluate the capability of the manufacturer to produce helmets that meet the relevant Indian Standard consistently.

How Can Manufacturers Obtain BIS ISI Certification for Helmets?

The certification is done under Scheme-I of BIS and comprises review of the application and supporting documents, inspection of the factory, testing of helmets, and issuance of a licence.

Consider the QCO for Helmets, 2020, and the certification guidelines of BIS.

Step 1: Identify the Applicable Indian Standard

Identify the Indian Standard and QCO applicable to two-wheeler rider helmets.

  • Check against IS 4151:2015.
  • Review the latest amendments/revisions.
  • Refer to the Helmet QCO, 2020, and BIS certification guidelines.

Step 2: Preparing the Manufacturing Facility

Check if the manufacturing unit has adequate infrastructure for production and quality control.

  • Finalize the helmet designs and technical specifications.
  • Finalize quality control and testing.
  • Get the required machines and testing equipment.
  • Make samples of representative products.

Step 3: Submitting Application to the BIS

Fill in the online application available on the BIS Manakonline portal.

  • Provide company and manufacturing unit details.
  • State the relevant Indian Standard.
  • Provide required technical and business documents.
  • Pay the application fee.

Step 4: Inspection by the BIS

The official checks if the manufacturing unit has the capability to consistently test helmets as per the relevant Indian Standard.

Step 5: Product Testing

Samples of helmets are tested in BIS-recognized labs to assess if they conform to IS 4151:2015.

Step 6: Corrective Actions

Take appropriate corrective actions, both in the quality control system and the product, for the shortcomings observed during the inspection or test. Submit further samples, reports or evidence, as required.

Step 7: Payment of Licence and Marking Fees

On successful completion of assessment and testing, pay the licence and marking fees.

Give the required declarations and undertakings. Complete the other formalities of BIS.

Step 8: Receiving the BIS ISI Licence

On verification, BIS allows the manufacturer to use the ISI mark on helmets and authorizes the CM/L number.

  • Put the authorized CM/L number on helmets.
  • Maintain records of production, quality control, inspection, and tests.
  • Follow conditions stipulated by BIS during the surveillance and licence period.

Documents Required for BIS Certification of Helmets

Correct documentation prevents queries and delays. The documents generally include:

  • Basic data of manufacturing unit and product segment
  • Proof of address of manufacturing unit (ownership/lease deed, utility bill, etc.)
  • TM registration (if the brand name is used and registered)
  • Manufacturing license/statutory approvals (if applicable, e.g., pollution control, etc.)
  • Drawings/designs of product
  • Installed manufacturing capacity
  • Raw materials used and their specification
  • Details of manufacturing machinery/equipment
  • Layout plan of factory
  • Process flow (manufacturing)
  • In-house test equipment and calibration
  • Quality control personnel
  • Organization chart of factory

Other documents may also be required based on the types of manufacturing units, applicants, and the current BIS application requirements.

BIS ISI Certification of Two-Wheeler Helmets

The BIS ISI certification of helmets for riders of two-wheeler motor vehicles is determined by the Indian Standard, the number of varieties of helmets, the extent of laboratory tests, and the inspection of the factory.

There may be disparities in costs for Indian and foreign manufacturers, based on the route taken for certification and fulfillment of BIS requirements. Approximate cost components may include:

ParticularsEstimated Cost (INR)
BIS Application Fees₹1,000
Laboratory Testing Charges₹15,000 – ₹2,50,000
Factory Inspection Charges₹7,000
Annual Licence Fees₹1,000
ISI Marking FeesAs per BIS norms and production
UMSPCS Consultancy Charges₹50,000

Timeline for BIS ISI Certification for Helmets

The process of BIS ISI Certification for helmets generally takes approximately 30 – 40 working days for Indian manufacturers, depending on documentation, product testing, and factory inspection schedules.

Approximate time for various stages of BIS ISI Certification:

Certification StageEstimated Time
Documentation and Application5 – 7 working days
Product Testing10 – 15 working days
Factory Inspection and BIS Evaluation10 – 18 working days
Overall Estimated Timeline30 – 40 working days

For foreign manufacturers using the FMCS route, the process may take 5 to 6 months, and possibly longer, due to time taken for international factory inspections and other formalities.

As per Scheme-I, the BIS License is valid for a period of two years from the date of issue and can be renewed, based on conformity of the product and applicable BIS requirements, payment of renewal fees, and subject to other conditions.

Challenges Faced by Helmet Manufacturers for Obtaining BIS Certification

There may be challenges even for manufacturers with an established production facility for obtaining BIS certification. Some of the challenges are as follows:

  • Classification of the product in the appropriate schedule/ category
  • Passing product tests
  • Inadequate infrastructure in the factory for production of all variants of the product
  • Differences in the documentation submitted to BIS
  • Compliance after certification

It should also be understood that one approved helmet model does not mean other models from the same manufacturer are approved as well. The scope of the approved license needs to be checked before expanding the production of other models and/or variants. Read more also: BIS Certificate for Foreign Manufacture.

How UMSPCS Helps Manufacturers Obtain BIS ISI Certification for Helmets

UMSPCS enables and facilitates manufacturers in obtaining BIS approval and meeting their compliance objectives. With 6+ years of experience in dealing with 600+ product regulations and compliance across various industries, UMSPCS has a thorough understanding of the Indian manufacturing ecosystem.

We provide the following services:

  • Determining the applicable standards
  • Documentation
  • Factory assessment readiness
  • Coordinating laboratory tests
  • Assisting with completion of BIS application
  • Supporting during inspections
  • Compliance after certificate issuance

Conclusion

BIS ISI certification is mandatory for two-wheeler helmet manufacturers for their products to be sold in the Indian market. Manufacturing units need to comply with the requirements of IS 4151:2015, pass the product test, and possess adequate infrastructure to manufacture helmets in order to obtain a BIS license.

Foreign or Indian manufacturers looking to enter the Indian helmet market or Indian manufacturers looking to launch a new helmet range should be aware of the different requirements to avoid unnecessary delays and compliance hurdles.

Interested in obtaining BIS ISI Certification for helmets? Contact UMSPCS now, and we will help you every step of the way.

Read more also: Which Consultants Support BIS Certificate in Delhi NCR

FAQs

  1. Is it mandatory for helmets for two-wheeler riders to be certified by BIS ISI in India?

Yes, as per the Helmet Quality Control Order (QCO), 2020, helmets covered under the order are required to comply with IS 4151:2015 and carry the BIS Standard Mark under a valid licence.

  1. What Indian Standard do two-wheeler rider helmets conform to?

The applicable Indian Standard is IS 4151:2015, Protective Helmets for Motorcycle Riders.

  1. Can helmet manufacturers sell products without an ISI Mark in India?

No, manufacturers cannot sell helmets covered under the QCO without the required BIS licence and ISI marking.

  1. Can Indian manufacturers apply for BIS ISI Certification on their own?

Yes, Indian manufacturers can apply for BIS ISI Certification directly via the BIS Manakonline portal after establishing the required facilities and documentation at their factories.

  1. Can foreign helmet manufacturers also get BIS ISI Certification?

Yes, the Foreign Manufacturers Certification Scheme (FMCS) allows foreign manufacturers to also apply for BIS ISI Certification and meet the applicable BIS requirements.

  1. Can an Indian importer make an application for BIS ISI Certification on behalf of a foreign helmet manufacturer?

No, under the FMCS, it is the foreign manufacturing unit that must apply to the BIS and, if required, nominate an Authorised Indian Representative.

❓ Ask a Question

Have any doubts? Fill the form below and our team will respond shortly.

Service & blog Page Form
ISO Badge
Contact Page Form