UMSPCS-Compliance

What Are the BIS Requirements for Manufacturing Press Tool-Punches in India?

What Are the BIS Requirements for Manufacturing Press Tool-Punches in India?

Precision press tool-punches are complex components that require a thorough understanding of materials, processes, and controls to ensure accuracy and durability. If you wish to manufacture press tool-punches in India, there is one more important aspect that you cannot ignore. This is certification by the Bureau of Indian Standards (BIS).

The Government of India has notified the Press Tool-Punches (Quality Control) Order, 2020. As per this order, compliance with the specified Indian Standards has been made mandatory for notified Press tool-punches. Therefore, it is important for tool-punch manufacturers to be aware of the applicable standards, product testing, factory assessment, and license conditions before bringing the covered product to the Indian market.

Among the specified standards, which Press tool-punches require certification? What are the specifications for Press tool-punches? What is the process for an Indian or foreign manufacturer to obtain an ISI license?

This blog provides information about the Press tool-punch certification process in detail, i.e., relevant standards, legal framework, documentation, testing, certification, costs, and time, along with information that is useful for manufacturers wishing to enter the Indian market.

What Press Tool-Punches Require Mandatory BIS Certification?

The Press Tool-Punches (Quality Control) Order, 2020 was issued by the Department for Promotion of Industry and Internal Trade (DPIIT), Ministry of Commerce and Industry on November 4, 2020, and published in the Gazette of India as S.O. 3994(E). The order was effective from May 10, 2021, and applies to three categories of press tool-punches.

Product categoryApplicable Indian Standard
Round punches with 60-degree conical head and straight shankIS 4296 (Part 1):2016
Punches with cylindrical head and straight or reduced shankIS 4296 (Part 2):2015
Round punches with 60-degree conical head and reduced shankIS 4296 (Part 3):2015

The QCO states that the latest versions of the relevant Indian Standards, including amendments notified by the BIS, are applicable. Therefore, manufacturers should verify the latest versions before preparing their certification applications.

The order mandates that relevant standards should be met and the Standard Mark should be used under Scheme-I of the BIS (Conformity Assessment) Regulations, 2018. Products for export are exempted under the order.

What are the Main Requirements for BIS Certification of Press Tool-Punches?

BIS Certification for Press Tool-Punches, the manufacturer has to ensure that their production facilities and quality management system are aligned to the Indian standard which is applicable.

The key requirements include:

  • Manufacturing facilities
  • Raw materials
  • Dimensional accuracy
  • Testing facilities
  • Quality Control System
  • Product marking

Understanding the BIS Certification Scheme on Press Tool-Punches

As per the BIS (Conformity Assessment) Regulations, 2018, press tool-punches come under Scheme-I (ISI Mark Scheme).

Prior to the issuance of the Standard Mark, BIS has to be satisfied that the manufacturer is capable of producing the product and also testing the product to the Indian Standard and has an effective quality control system in place.

The Standard Mark license is issued to the manufacturer for the specified location and product variation and does not cover other products and other locations.

The process for the BIS ISI certification for electronic products and press tool-punches is different, and press tool-punches come under Scheme-I and do not fall under the certification process for electronic products.

How do Manufacturers get the BIS ISI Certification for Press Tool-Punches?

Issuance of the BIS ISI Mark for press tool-punches is through a joint effort of the manufacturer, testing facility, and BIS. The process is described below.

Step 1: Determine the Applicable Indian Standard

There are Indian Standards and QCO that are applicable for press tool-punches and its design and configuration. Identify these standards.

  • Identify if the tool-punches come under any of the sections of IS 4296 (Part 1, 2 or 3).
  • Check the latest revisions and amendments to the IS code.
  • Refer to the QCO and the BIS certification requirements and guidelines.

Step 2: Prepare the Manufacturing Facility

If your manufacturing unit has the required facilities and quality control to manufacture tool-punches as per the requirements of BIS then proceed.

  • Complete the design and manufacturing details.
  • Finalize the quality control and testing.
  • Procure and install measuring and testing equipment.
  • Prepare samples of tool-punches for testing.

Step 3: Submit the BIS Application

Submit your application online to BIS through the BIS Manakonline portal.

  • You will be required to provide the name and address of your company/manufacturing facility.
  • You will be required to specify the Indian Standard that is applicable.
  • You will need to submit the required documents.
  • Pay the prescribed fee and submit your application.

Step 4: BIS Factory Inspection

BIS officials will verify if the manufacturing unit has the capabilities to manufacture the tool-punches as per the requirements of the concerned Indian Standard.

Step 5: Product Testing

Representative samples of the products will be tested in BIS recognized laboratories to ascertain if they conform with the requirements of IS 4296.

Step 6: Take Corrective Action

Corrective actions are taken for the deficiencies that were observed during factory inspections/product tests.

  • Quality control and assurance systems are improved.
  • Additional samples/test reports are submitted, as required.

Step 7: Pay Licence and Marking Fees

On completion of the assessment and testing requirements of BIS, the licence and marking fees are paid, and the final procedural requirements are completed. The other declarations, if any, that are requested by BIS are also submitted.

Step 8: Receive BIS ISI Licence

Upon verification by BIS, the licence is issued to the manufacturer to use the ISI Standard Mark on the approved press tool-punches.

  • Mark the product as authorized by CM/L.
  • Ensure the quality of the product and inspection records.
  • Be compliant with the Mercantile Act, i.e., surveillance and licensing, etc.

Documents Required for BIS Certification for Press Tool-Punches

The following documents are to be submitted to avoid application deficiencies and delays.

Manufacturers should submit:

  • Address proof of the manufacturing unit (utility bills/title deeds)
  • Registration certificate of trademark (in case the brand name is registered and used)
  • Evidence of statutory approvals and manufacturing license (if any)
  • Designs and schematics of product
  • Manufacturing and Installed capacity
  • Specifications of Raw Materials used
  • Equipment and machinery used in manufacture
  • Layout of factory and Process flow of manufacturing
  • In-house test equipment used and their calibration
  • Information on Quality Control Staff
  • Organizational Chart of the Factory

Any other additional documents or declarations as required.

BIS Certification Cost for Press Tool-Punches

The expenses incurred for BIS Certification for Press Tool-Punches are determined based on the Indian Standard applicable to the product, category of the product, and varieties, as well as laboratory tests, if any. 

Generally, costs are similar for both Indian and foreign manufacturers; however, the overall expenses vary based on the requirements of the BIS certification process and factory inspections.

The cost breakdown is given below:

ParticularsEstimated Cost (INR)
BIS Application Fees₹1,000
Laboratory Testing Charges₹15,000 – ₹2,50,000
Factory Inspection Charges₹7,000
Annual Licence Fees₹1,000
ISI Marking FeesAs per BIS norms and production
UMSPCS Consultancy Charges₹50,000

Timeline for BIS ISI Certification for Press Tool-Punches

The process of BIS Certification for Press Tool-Punches in India will take approximately 30 to 40 working days.

The time required for different certification stages is given below:

Certification StageEstimated Time
Documentation and Application5 – 7 working days
Product Testing10 – 15 working days
Factory Inspection and BIS Evaluation10 – 18 working days
Overall Estimated Timeline30 – 40 working days

The times indicated above are approximate and may change based on the lab and factory inspection schedules. Also, need to know more about BIS Certificate for Foreign Manufacture.

As per Scheme-I, a BIS license is valid for a period of up to two years, subject to the BIS conditions. The same is renewed by meeting the requirements, paying the renewal fee, and maintaining the product in conformity with the requirements.

Challenges in BIS Certification Process

Some of the major challenges during the BIS certification process are:

  • Inadequate testing infrastructure
  • Inconsistencies in the material and hardness
  • Documentation deficiencies
  • Inadequate factory inspection
  • Compliance by foreign manufacturers

How UMSPCS Helps Manufacturers Obtain BIS ISI Certification for Press Tool-Punches

An understanding of the Indian subcontinent’s regulations, standards, and procedures is required to obtain a BIS license.

UMSPCS, with 6+ years of compliance experience and having assessed 600+ product compliance requirements, is positioned to assist Indian and international manufacturers in a structured way.

We assist in:

  • Determining the applicable Indian Standards
  • Assessing Regulatory Requirements
  • Preparing required documentation
  • Coordinating tests
  • Preparing factories for audits
  • Applying for a license
  • Coordinating with FMCS

Conclusion

Manufacturing press tool-punches involves complying with the provisions of the Press Tool-Punches (Quality Control) Order, 2020 and the applicable part of IS: 4296.

Obtaining the ISI mark is a systematic process starting from determination of Indian Standards to establishment of testing facilities and finally completion of factory inspections.

If you want to set up or manufacture within India, understanding the BIS ISI Certification for press tool punches is important, as you will then be aware of the requirements to establish a compliant manufacturing process with the Indian Laws and Regulations.

Need support with BIS Certification?

UMSPCS is at your service for all support with Product Certification, Documentation, Lab testing, Factory audits, and Regulatory Approvals.

Read more also: How Do Mobile Phone Manufacturers Meet BIS Requirements

FAQs

  1. Is BIS Certification necessary for the manufacturing of press tool-punches in India?

Yes, from 10th May, 2021, the manufacture of Press tool-punches comes under the purview of the Press Tool-Punches (Quality Control) Order, 2020, and the BIS Certification for the same has also been notified.

  1. Can a manufacturer sell press tool-punches without ISI mark?

No, the requirements of the Quality Control Order (QCO) and the prescribed BIS Licence and Standard Mark are mandatory for manufacture of covered products for the Indian market and their sale in the Indian market.

  1. What BIS Certification scheme is applicable for press tool-punches?

Press Tool Punches are covered under Scheme-I of the (Conformity Assessment) Regulations, 2018, also known as the ISI Mark Scheme.

  1. Can foreign manufacturers of press tool-punches get BIS certification?

Yes, foreign manufacturers can apply under the Foreign Manufacturers Certification Scheme (FMCS) and must appoint an Authorized Indian Representative.

  1. Are press tool-punches part of the BIS CRS certification?

No, press tool-punches are part of the ISI Certification Scheme-I, not the Electronic Product CRS Registration Scheme.

❓ Ask a Question

Have any doubts? Fill the form below and our team will respond shortly.

Service & blog Page Form
ISO Badge
Contact Page Form