In 2023, the Indian government achieved significant improvements in both the safety and quality of the product, through the implementation of the steel wires or strands, Nylon or wire ropes and wire mesh quality control order. Nowadays, this order is also known as The Wire Mesh QCO 2023, which requires certain wire products that can be made, sold and imported to get BIS certification.

UMS product compliance services (UMSPCS) provides a comprehensive guide on the wire mesh QCO 2023 India guidelines. This Blog describes the wire mesh QCO2023 India guidelines, including the implementation schedule, covered products, and requirements for BIS certification for steel wire suppliers. 

Introduction to Wire Mesh QCO 2023 India Guidelines

Quality control orders (QCOs) issued by the Indian Government are to ensure that important goods comply with the established safety and quality standards. The wire mesh QCO 2023 India guidelines aim to protect industries, buildings, and consumers by removing low-quality wire products from the Indian market. 

Manufacturers & imposters must accept this order to make sure their products meet the required Indian standards (IS) and also include the BIS standard mark before being marketed or exported in India.

What Is Wire Mesh and Why Is Quality Regulation Important?

Wire ropes, steel wire, and wire mesh are often used in:

• Civil engineering and construction.
• Mining, lifting, and raising tasks.
• Application for barriers and safety.
• Drilling and oil wells.
• Avoiding rocks from falling and protecting infrastructure. 

Failure of such products results in major accidents, damage to structures and financial loss. Certified, tested, and guaranteed quality products can make it easy to enter the market because of the wire mesh QCO 2023.

Overview of the Steel Wires, Nylon Ropes & Wire Mesh QCO 2023

According to the published announcements dated 21 Nov 2023, the order is officially named as “Steel wires or strands, Nylon or wire ropes and wire mesh (Quality control) order 2023”.

The major objectives of the wire mesh QCO 2023 India guidelines are as follows:

• Ensures consistent norms for excellence in quality.
• Scheme I need a BIS certification.
• Limit the expansion of inappropriate and non-standard products.
• Improve the BIS Act 2016 enforcement of regulations. 

Implementation Date and Applicability Timeline

The wire mesh QCO 2023 comes into effect:

• Six months after the announcement is published.
• MSMEs receive special relaxations.
• Small businesses- 9 months
• Microbusinesses- 12 months 

Relevance:

• Local farmers in the area.
• Manufacturers who export from other countries to India.
• Importer with covered product.

Exemption: This order is not applicable to products made only for export.

Products Covered Under Wire Mesh QCO 2023

Products covered by QCO are as follows:

Nylon ropes, wire ropes, steel ropes and strands

• Steel wire ropes are for everyday engineering purposes.

• Lifts and elevators hang ropes made of steel wire.

• Steel wires are used for transporting mining.

• Wire ropes are used for drilling and the extraction of oil.

• Mountaineering ropes are made of braided nylon.

Wire mesh and relevant products

• Galvanised steel for fencing is made from barbed wire.

• Hexagonal wire mesh that is mechanically woven & double twisted.

• Protective mattresses, pillars, and rock-fall mesh.

Only products that meet all Indian Standards are allowed to be sold in India.

Indian Standards Applicable Under Wire Mesh QCO 2023

Some important IS standards covered by this offer are as follows:

IS 2266:2019- Steel wire for general engineering.

IS 2365:2018-  Hanging ropes for lift and hoist.

IS 1855:2022- Standard steel wire for mining.

IS 1856:2005- Steel wire ropes for transportation. 

IS 6590:1972- Nylon braids with ropes.

IS 278:2009-  barbed wire made of galvanised steel.

IS 16014:2018- Civil engineering products and wire mesh fences.

The recent version and changes to these Indian standards must be followed by importers and manufacturers.

BIS’s role as per the wire mesh QCO 2023 India Guidelines 

The Bureau of Indian Standards (BIS) is assigned as:

• The certification authority 

• The enforcement authority 

Each covered product must be:

• Inspected in labs authorised by the BIS.

• Produced using approved quality control procedures.

• Carry the BIS standard mark under the scheme-I of BIS Conformity Assessment Regulations, 2018

BIS Certification for Wire Rope Manufacturers

Reasons for getting BIS certifications:

Wire rope producers must obtain BIS certification under the wire mesh QCO 2023 to ensure strength, durability and safety compliance.

Key Requirement:

• Applying to BIS

• Verification and inspection of the manufacturing process.

• Product testing with the IS guidelines.

• Validation of the process of quality control

• BIS licence grant

Once the QCO becomes effective, manufacturers are unable to market wire ropes in India without an active BIS license.

BIS Certification Process for Wire Mesh Manufacturers

Wire mesh manufacturer’s BIS certification procedures.

The certification process is as follows:

• Selecting an appropriate Indian standard.

• Product testing in BIS-approved labs.

• Quality system monitoring and factory inspection.

• Submission of document and test report.

• Granting a BIS license and marketing approval.

Ongoing compliance is ensured by constant surveillance and inspection.

Wire Rope Manufacturer’s BIS Certification:

Reasons for demanding BIS certification:

The QCO obviously concerns Imports as BIS certification isessential for steel wire importers.

Legal Import requirements:

• BIS approval for a foreign manufacturer.
• An officially Authorised Indian Representative (AIR) is being picked.
• Confirmation of entire compliance at border control.
• Imports are only allowed for BIS products.

Non-certified imports may be seized, rejected or delayed.

Testing and Quality Requirements Under Wire Mesh QCO 2023

Products must go as follows:

• Products must be tested for their mechanical durability. 
• Submission of document and test report.
• Granting a BIS license and marketing approval.
• Ongoing compliance is ensured by constant surveillance and inspection.

BIS focuses on:

• Regulart monitoring.
• Testing samples from the market.
• Factory inspection.

Penalties for failure to comply

This Act, 2016, imposes penalties for any violation of the wire mesh QCO 2023 India Guidelines. 

It includes:

• Harsh financial penalties.
• Cancellation of the BIS license.
• Seizure of inappropriate products.
• Legal Prosecution.

Benefits of Wire Mesh QCO 2023 Compliance

• Legally Access to the Indian market.
• Improved credibility of the product.
• Increased trust among customers.
• Decreased the risk of litigation.
• A competitive advantage.

Common Compliance Challenges

• Incorrect selection of the IS Standard
• Delays in the test.
• Lack of documents.
• Unsuccessful factory inspection.
• Difficulties with import clearance.

Expert advice is essential for effectively solving these kinds of problems. UMSPCS gives complete  BIS  certification support, assisting importers and manufacturers with documents, managing testing, handling factory inspection and smooth approval under Scheme I certification. 

In Conclusion 

The Wire Mesh QCO 2023 India Guideline represents an essential change in regulation for wire mesh, wire ropes, and steel wire products in India. BIS certification compliance is now required by law and is no longer optional. UMSPCS, a leading compliance company of India, which helps to make this complex compliance journey easy for you. Along with minimising fines, early compliance will boost your business

Partnering with a trusted consultancy of BIS  like UMSPCS ensures quick compliance, reduced risk with regulators, and helps you improve your business growth in India.  BIS certification compliance is now required by law and is no longer optional. Before selling products in the Indian market, importers must provide BIS certification for steel wire importers and manufacturers. Visit us today to accelerate your BIS certification procedure.

Frequently Asked Questions(FAQ)

1. What is the Wire Mesh QCO 2023 India?

A- The wire mesh QCO 2023 India explains all about steel wire or strands, Nylon or wire ropes and wire mesh. This QCO 2023 is a quality control order issued by our Indian government. The main goal of Wire Mesh QCO 2023 India is to ensure that these wire products are safe to use and comply with all Indian Standards.

2. Is BIS certification mandatory under Wire Mesh QCO 2023?

A- Yes, the Government of India made the BIS certification mandatory by law under the Wire meets QCO 2023. Selling covered products in the Indian market without the BIS licence can cause harm to your product, and legal actions can also be taken.

3. Which products are covered under the Wire Mesh QCO 2023?

A- The wire mesh QCO 2023 covers:

• Steel wires with strands.
• Nylon ropes and braided ropes.
• Fencing and barbed wire.
• Rock-fall protection mesh.

4. Is any exemption available under Wire Mesh QCO 2023?

A- Yes, exemptions are available for the product manufacturers only for exports. Even if the same product comes to be sold in the Indian market, BIS certification becomes mandatory.

5. Can BIS certification be cancelled after approval?

A- Yes, BIS may suspend or cancel the licence if:

• The quality of the product is poor.
• The product failed to pass the laboratory and factory inspections.
• Misuse of the BIS standard mark 

6. How long is the BIS certification process under the wire mesh QCO 2023?

A- BIS certification may take 8-12 weeks on average if no complication comes within the paperwork, testing and inspection. The duration of testing, factory availability and the product type all impact the timeline. 

7. Which Indian Standard (IS) is applicable under the wire mesh QCO 2023?

A-  The most significant standards are:

IS 2266: General Engineering for steel wire.

IS 2365: Lifting and raising wire ropes.

IS 1856: Steel wire mining.

IS 278: Galvanised wire with barbs.

IS 16014: Products of metallic wire fencing.

Manufacturers have a duty to conform to the latest and most recent updates. 

8. What does the BIS scheme I certification mean?

A-  Products issued under QCOs are accepted for the ISI mark certification program, scheme I. In order to make sure regular compliance, BIS operated factory examination, product testing and regular monitoring.

9. Is Factory inspection mandatory for BIS certification?

A- Yes, Factories must be inspected by the BIS officials. As the inspection proves that the testing facilities, manufacturing process, quality control systems, and respect to the necessary Indian standards remain in line.