UMSPCS-Compliance

Electric Iron

UMSPCS - Electric Iron

BIS Certification for Electric Iron | ISI Mark Consultant

Get expert assistance for BIS certification and ISI Mark requirements for electric irons IS 302 (Part 2/Sec 3) in India. UMSPCS supports documentation, testing and certification.

  • BIS Registration Guidance
  • Application Filing Support
  • BIS Authority Coordination
  • Cost & Timeline Clarity
  • Complete Documentation Help
UMSPCS google rating new
Home / BIS ISI / Electric Iron

Enter your details to receive a full quote and consultation

Service & blog Page Form

BIS ISI Certification for Electric Iron Under IS 302 (Part 2/Sec 3): Requirements, Process & Complete Guide

An electric iron is a simple domestic appliance but has to house heating elements, electrical insulation, wiring, temperature control, and an external hot surface. Failure along any of these lines can pose risks like electric shock, overheating or fire. Hence, it's mandatory to have BIS ISI Certification for electric irons in India.                 

The standard has been updated to IS 302 (Part 2/Sec 3):2024 / IEC 60335-2-3:2022, and IS 302 (Part 2/Sec 3):2007 has been superseded during the transition period. The existing ISI classification scheme lists ISI 302 (Part 2/Sec 3) for electric irons.

Support for product assessment, co-ordination of product testing, documentation, filing of BIS application, and factory inspection preparation and support for the electric iron is provided by UMSPCS.

What Is BIS ISI Certification for Electric Irons?

BIS ISI Certification for Electric Irons certifies that the product covered meets the requirements of the applicable Indian Standard and BIS certification.

The current particular standard is IS 302 (Part 2/Sec 3):2024 / IEC 60335-2-3:2022 Household and Similar Electrical Appliances. Safety, Part 2: Particular Requirements, Section 3: Electric Irons. This is a product of Scheme I (ISI Mark Scheme).

The specific standard is used in conjunction with the general requirements given in IS 302 (Part 1). There were several changes made in the 2024 revision, such as requirements for accessible surface temperatures, marking and instructions, charging of metal-ion batteries, mechanical strength, and pressure protection.

UMSPCS Special Offer new
🎉 Special Offer
₹499 FREE

Get Your Free Expert Consultation

Popup Form

Is BIS Certification Mandatory for Electric Irons in India?

Yes. Electric irons are mandatory and listed in BIS's compulsory listing scheme (IS 302/Part 2/Sec 3). Scheme I of BIS indeed mentions the standard under the product list mentioned in the standard under products covered by the ISI Mark Scheme.

Hence, manufacturers of covered electric irons must get the appropriate BIS licence in order to market the products in India.

If a manufacturer has an older licence, the transition requirements and new standard requirements should be verified prior to continuing manufacturing under an older standard.

Which Types of Electric Irons Require BIS Certification?

The standard covers electric irons in its scope of applicability. The scope of certification should be determined depending on the actual product design, rated voltage, power supply, and configuration of the manufacturer.

The scope of the current BIS laboratory database includes electric irons with rated voltage up to 250 V as well as some DC and battery-operated appliances, which are included in the revised scope.

Product classification is important prior to testing and application filing.

Key Safety Requirements for Electric Iron Certification

BIS testing compares the appliance to the relevant safety standards. A test may consist of one or more of the following:

  • Contingencies for access to live parts.
  • Input power and current.
  • Heating
  • Leakage current and electric strength
  • Moisture resistance
  • Endurance
  • Abnormal operation
  • Stability and mechanical hazards
  • Mechanical strength
  • Construction
  • Internal wiring
  • Earthing
  • Screws and connections
  • Clearances and creepage distances.
  • Resistance to heat and fire
  • Resistance to rusting
  • Marking and instructions

BIS's LIMS database currently lists these types of test parameters for IS 302 (Part 2/Sec 3): 2024.

The specific test programme is dependent on the product configuration and the applicable certification requirements.

Who Needs BIS Certification for Electric Irons?

BIS compliance may be relevant to:

  • Indian Electric Iron Manufacturers
  • The leading manufacturer of foreign goods that are made in India.
  • Importers
  • Brand owners
  • OEM/ODM manufacturers
  • Enterprises that are starting to introduce their own label electric iron.

The BIS route and requirement for a representative should be determined on the basis of the manufacturing/supply arrangement for foreign manufacturers.

BIS ISI Certification Process for Electric Iron

We take a systematic approach to assist manufacturers with the certification process at UMSPCS. The BIS ISI Certification for Electric Iron is managed in an organised manner, allowing the manufacturer to get prepared for each step.

Step 1: Identification of Relevant Indian Standard

This step will be taken through the following steps:
  • Product categories analysis
  • Identification of the relevant IS code
  • Analysis of the compliance requirements
  • Gap analysis in the manufacturing process
  • Leadership in meeting the BIS quality requirement

    • Step 2: Product Testing and Document Preparation

    Product testing should be conducted at an accredited and authorized BIS laboratory to meet the relevant standards.
    The following steps are part of this phase:
  • Sample analysis of the product
  • Preparation of the technical documents
  • Data collection about the manufacturing process
  • Quality records of superior quality
  • Form preparation

    • Step 3: BIS Application Filing

    BIS application filing should be done after testing and document preparation.
    The following steps are included in this phase:
  • BIS application filing
  • Test report submission
  • Factory information submission
  • Government fee payment
  • Initial BIS officers' scrutiny

    • Step 4: BIS Factory Inspection

    An inspection of the factory is carried out by the BIS authorities to ensure that all the requirements for certification are met.
    BIS inspects for:
  • Manufacturing process
  • Production facilities
  • Quality assurance systems
  • In-house testing facilities
  • Product consistency

    • Step 5: Sampling and Testing

    Samples of the product can be collected during inspection and tested independently.
    This step includes:
  • Sampling by the BIS officers
  • Tests conducted on samples in the laboratory
  • Evaluation of test results
  • Submissions of Lab Test Reports (LTR)

    • Step 6: Observations Closure

    If any observations are noted through inspection or testing, then measures should be taken to address them.
    It may include:
  • Addressing BIS observations
  • Taking corrective action
  • Updating technical documentation
  • Proof of compliance submission
  • Closing of observations

    • Step 7: License and Marking Fee Payments

    When the compliance verification is done successfully, the license fee needs to be paid.
  • Some of the fees include:
  • Annual Licence Fee Payment
  • ISI Marking Fee Payment
  • License Conditions Compliance

    • Step 8: BIS Licence Issue

    After all the processes are successfully carried out, the BIS issues the license certificate.
    Once the license is issued, then:
  • The ISI mark can be applied to the licensed products
  • Products can be sold in India
  • Ongoing compliance will be needed by the manufacturers.

    • Documents Required for BIS ISI Certification of Electric Iron

    But the documents that are required may vary from product to product or from one certification scheme to another.

    The list of documents to be provided includes:

    • Details about the segment of the product and the manufacturing plant.
    • Proof of the manufacturing address of the unit, such as an electricity bill/lease/deed of ownership.
    • Trademark certificate for the brand name.
    • Production licenses and any statutory clearances.
    • Design details and product drawings.
    • Manufacturing capacity installed
    • Materials list and specification.
    • Details about the equipment and machinery used in manufacturing.
    • Factory layout showing manufacturing, testing, and storage facilities.
    • Also included is an elaborate manufacturing process flow.
    • Test equipment and calibration information.
    • Quality control personnel details.
    • Factory organisational chart.

    BIS ISI Certification Cost

    Many manufacturers ask about the cost of certification. The total cost will vary based on:

    • Type of product
    • Indian standard for the product
    • Number of models
    • Testing requirements
    • Audit requirements for the factory
    • Government BIS costs
    • Consultant requirements
    Particulars Estimated Cost (INR)
    Application Fees (BIS)
    ₹1,000
    Testing Charges (Lab Fees)
    15000- ₹2,50,000
    Factory Inspection Charges
    ₹7000
    Annual License Fees
    ₹1,000
    Marking Fees (ISI Mark Usage)
    As per BIS norms (based on production)
    Consultancy Charges (UMSPCS)
    ₹ 50000
    Call Today!
    WhatsApp Now!

    BIS Certification Certificate Validity

    Validity of BIS Certification depends upon the certification system itself.

    • License Validity for ISI: Generally valid up to the period stipulated in the BIS license.
    • CRS Registration Validity: Valid for a period of 5 years.
    • Foreign Manufacturer Certification Validity: Depends on the BIS license.

    It becomes necessary for the manufacturers to renew the certificates in time so as to continue their production and sales without any interruption. Read more also BIS ISI Mark certification.

    Why Do Electric Iron BIS Applications Get Delayed?

    Common problems are:

    • Incorrect standard identification
    • Testing against an inappropriate scope
    • Incomplete technical documents
    • The differences between the tested and declared models.
    • Missing calibration records
    • Poor standard in-house testing arrangements
    • Product which fails to meet applicable safety tests
    • Sybilization of marking and/or labelling information
    • Responses to BIS observations that are slow.

    It is particularly relevant for manufacturers who have existing or older BIS licences to verify the standard version.

    Why Choose UMSPCS for BIS Certification of Electric Irons?

    At UMSPCS, manufacturers seeking BIS ISI Certification for electric irons can avail assistance from end-to-end.

    Our support includes:

    • Product applicability assessment
    • IS standard identification
    • Testing laboratory coordination
    • Technical documentation
    • BIS application filing
    • Factory inspection preparation
    • BIS query handling
    • Licence support
    • Support to renew and post-certification.

    We assist manufacturers in undertaking the certification process in a structured manner, with the relevant BIS requirements clearly in mind.

    Conclusion

    For manufacturers exporting covered electric irons to India, BIS ISI Certification for electric irons is a crucial regulatory compliance. After the transition period, the current applicable standard is IS 302 (Part 2/Sec 3):2024 / IEC 60335-2-3:2022, which superseded the previous 2007 version.

    Manufacturers are advised to seek all current BIS licence information, scope of products, testing, and technical documentation for verification with the new standard rather than use the previous information. Also, get to know more information about BIS Certification for Self Ballasted Lamps.

    Need BIS Certification on the Electric Iron?

    UMSPCS can help you with a product assessment, coordinate the lab documentation, and help you prepare for factory inspection, including preparing the BIS application.

    Call our BIS experts to talk about your BIS ISI Certification for Electric Iron needs.

    Frequently Asked Questions (FAQs)

    Electric irons that are IS 302 (Part 2/Sec 3) certified do have to get the required BIS certification.

    The revised standard is IS 302 (Part 2/Sec 3):2024 / IEC 60335-2-3:2022

     

    Yes, UMSPCS will be able to help you with identification, testing, documentation, application preparation, and inspection

    The test includes such things as heating, leakage current, electric strength, mechanical strength, moisture resistance, abnormal operation, and other applicable safety requirements.

    Yes, manufacturers who already have a licence should check for compliance with the new standard and relevant BIS implementation requirements

    Bis certification

    Ready to get your electronics BIS-registered?

    +91 7011067811

    ❓ Ask a Question

    Service & blog Page Form

    Services we Offer

    ISO Badge

    Get Free Expert Consultation

    Fill the form below and our team will contact you shortly.

    Popup Form
    Contact Page Form