An iron pipe may appear to be a simple iron pipe. However, pipe manufacturing is a technology-intensive industry, and the ability of pipe manufacturers to ensure uniformity and consistency in the pipes depends on stringent quality standards and tight process controls. Iron Pipes are often used in water supply, drainage, and sewerage systems. The reliability of piping systems largely determines the safety and service life of the system. Even minor variations in dimensions, wall thickness, and material composition can influence the service life of the system.
This is where BIS ISI Certification for Iron Pipes comes into play. It helps pipe manufacturers to benchmark the quality of their products and gain confidence in complying with Indian Standards prior to offering their products in the Indian market.
Manufacturers who wish to produce, import, or market Iron Pipes in the Indian market must understand the requirements of BIS certification. Ranging from identification of the right Indian Standard to testing of the product, preparation of factory documents, and obtainingthe ISI mark, the entire process has to be undertaken meticulously.
This blog provides information on the requirements of BIS ISI certification of Iron Pipes, the applicable standards, the process, the legal framework, the documentation, the costs, and the time required to obtain the certification. It provides information on the challenges that are commonly encountered by producers in obtaining BIS certification in India.
What’s the Reason Behind the Mandatory Requirement of BIS Certification for Iron Pipes?
BIS certification for products covered under mandatory Quality Control Orders (QCOs) is not a voluntary quality endorsement.
The Government of India enacted the Centrifugally Cast (Spun) Iron Pipes (Quality Control) Order, 2021, which mandates that products covered under the order conform to the specified Indian Standards and use the BIS Standard Mark.
The order identifies the following products and standards:
| Product category | Indian Standard |
| Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage | IS 1536: 2001 |
| Centrifugally cast (Spun) iron spigot and socket soil, waste, ventilating and rainwater pipes, fittings and accessories | IS 3989: 2009 |
| Hubless centrifugally cast (Spun) iron pipes, fittings and accessories – Spigot series | IS 15905: 2011 |
The order directs that products in the scope of the order bear the Standard Mark under Scheme-I of Schedule II of the BIS (Conformity Assessment) Regulations, 2018. Products for export are out of the scope of the order.
This means that manufacturers cannot regard BIS compliance as a voluntary market preference, in cases where the product concerned is notified in the order.
Basic Factory Requirements Before Applying for BIS
Prior to applying for recognition from BIS, a manufacturer of pipelines would have to demonstrate to BIS that its production facilities are capable of manufacturing pipelines in accordance with the relevant Indian Standard.
Some of the essential requirements include:
- Adequate production and testing facilities
- Sufficient number of technical personnel
- Systems to maintain quality and integrity of measurement and calibration
- Product records
- Appropriate identification of products
BIS may assess these facilities during a factory inspection. Having the machinery alone is not enough; a manufacturer must also demonstrate that its quality control systems are adequate and functioning.
Know BIS ISI Certification Process for Iron Pipes
There are several technical and administrative stages in this process. Before applying for certification, manufacturers should take some steps to ensure their facilities and products are in line with the requirements.
Step 1: Identify the Indian Standard
The first step is to identify the applicable Indian Standard, such as IS 1536:2023, for spun iron pressure pipes.
Manufacturers are to:
- Understand the applicable requirements;
- Ensure their products conform to the specified IS specifications; and
- Make changes to their manufacturing processes, if need be.
Step 2: Product Testing and Documentation
Manufacturers are to carry out product testing and draw up the relevant technical documents.
At this stage:
- Sample products are tested against applicable requirements;
- Details of manufacture and the factory are collected;
- Quality control documents are obtained; and
- Technical drawings are prepared.
Step 3: Application Submission
The BIS application form, along with the required information, is submitted via the BIS website.
The BIS application includes:
- Details of the product and the processes used for its manufacture.
- The machinery and factory where the product is made.
- The reports of product testing and supporting documents required.
- The BIS application fee.
Step 4: BIS Factory Inspection
A representative of the BIS visits the factory and checks the compliance of the manufacturing processes with the applicable standard.
He assesses the:
- Processes and machinery used for manufacturing.
- Infrastructure and facilities for production.
- Quality control.
- Laboratory and testing.
Step 5: Samples and Test Reports
Samples collected during inspection are forwarded to a BIS-recognized laboratory for testing.
- The laboratory conducts tests mentioned in the IS code.
- It sends the report directly to BIS.
Step 6: Closure of Non-Conformities
If deficiencies are identified during inspection or testing, the manufacturer is required to remove them. This may also include providing additional documents or clarifications.
Step 7: Payment of Fees
After completion of the assessment, the manufacturer is required to pay the BIS fees.
These may include:
- The licence fee and renewal charges.
- Fee for the ISI mark.
- Other charges for certification.
Step 8: Grant of ISI License
Once all certification requirements are met, the BIS issues the ISI License.
- Upon approval, manufacturers are:
- Authorized to use the ISI mark on certified Iron Pipes.
- Authorized to manufacture products within the scope of the approval.
- Authorized to supply the products in the Indian market, provided that they comply with the requirements of BIS.
Documents Required for BIS ISI Certification
The BIS verifies the identity of the manufacturer, his capabilities to manufacture the product to the given specification and quality, through various documentation.
The documents required may include, but are not limited to, the following:
- Basic data of the unit and product
- Address proof of the unit (e.g. lease/ownership deed, utility bill, etc.)
- Trade mark registration (if brand name is used and registered)
- List of manufacturing licenses/statutory approvals (e.g. pollution control and industry-specific approvals)
- Drawings/design schematics of the product
- Installed capacity
- Materials used along with their specification and manufacturer’s equipment
- Layout plan of factory showing production and test areas along with storage areas
- Detailed process flow/manufacturing process
- In-house test and calibration equipment
- Details of QC Personnel
- Organization Chart of the factory
BIS ISI Certification Cost of Iron Pipes
Factors like specification and testing of product, manufacturer’s setup and infrastructure ,and the complexity of documentation impact the cost of BIS ISI Certification of Iron Pipes.
Anticipated Cost Components:
| Particulars | Estimated Cost (INR) |
| Application Fees (BIS) | ₹1,000 |
| Testing Charges (Laboratory Fees) | ₹15,000 – ₹2,50,000 |
| Factory Inspection Charges | ₹7,000 |
| Annual Licence Fees | ₹1,000 |
| Marking Fees (ISI Mark Usage) | As per BIS norms, based on production |
| Consultancy Charges (UMSPCS) | ₹50,000 |
Estimated Time and Validity of BIS ISI Certification
Time taken for issuance of BIS ISI Certification of Iron Pipes would depend on the readiness of the required documents, the outcome of the product tests, completion of factory inspection, and the assessment of the application by BIS.
- It is anticipated to take 30-40 working days.
- The time could go up if there are failures in the product, insufficient documents, or other improvements required in the factory.
- For AIF products, time could go up to 180 days as per the rule.
Validity and Renewal of BIS License
Licenses under Scheme – I are issued for a period of up to two years. These can be renewed for a further period of up to five years.
Manufacturers are required to apply for renewal of licenses before the expiry of existing licenses to continue production and supply of the covered products under the relevant Scheme. Read more also: BIS Certificate for Foreign Manufacture
Challenges in Obtaining BIS Certification
Some challenges in obtaining ISI for Iron Pipes include:
- Misidentification of standards
- Testing failures
- Inadequate testing facilities
- Product grouping
- Inadequate/insufficient documentation
- Revised standards
- Organizing the above would help in making an appropriate application.
Choose UMSPCS BIS ISI Certification Services for Iron Pipes
It is the responsibility of manufacturers to comply with the requirements of the BIS certification process. UMSPCS focuses on various key areas to help manufacturers with this process.
With 6+ years of compliance experience and exposure to 600+ compliance requirements, UMSPCS supports Indian and overseas manufacturers with:
- Identification of Standards
- Documents
- Factory preparation
- Testing
- Application
- Inspection
- Support of Foreign Manufacturers
- Post-Certification Support
UMSPCS takes a product-specific approach to help manufacturers understand the regulatory requirements and the certification process.
Conclusion
BIS ISI certification is a mandatory regulatory requirement for manufacturers to supply spun iron pressure pipes, covered under the Applicable Quality Control Order.
Indian manufacturers planning to operate in the local market and foreign manufacturers aiming to sell Iron Pipes in India should consider the certification process as an opportunity to strengthen their business. It facilitates compliance with the regulations and builds the credibility of the product.
UMSPCS helps clients with the entire BIS certification process. We have expertise in identifying relevant requirements, drafting required documents, and managing the licensing process.
Read more also: What Approvals Are Required for Operation Theatre Equipment
FAQs
- Is BIS ISI Certification mandatory for Iron Pipes in India?
Yes, Centrifugally Cast (Spun) Iron Pipes (Quality Control) Order, 2021 stipulates that BIS Certification is mandatory for covered products.
- Which IS code applies to spun iron pressure pipes?
Centrifugally Cast (Spun) Iron Pressure Pipes, IS 1536:2023, is applicable for Centrifugally Cast (Spun) Iron Pressure Pipes for use in water, gas, and sewer services.
- Can manufacturers apply for BIS certification under IS 1536:2001?
No, IS 1536:2023 replaced IS 1536:2001 with effect from 19 December 2023.
- What tests are to be conducted for spun iron pipe certification?
Tensile Test and Brinell Hardness Test, among others.
- Can foreign manufacturers obtain BIS ISI certification?
Yes, foreign manufacturers can get certified under the FMCS and should nominate an AIR.
- Can different pipe sizes be included in one BIS license?
Yes, subject to BIS product grouping norms, and if tests and inspections for the sizes in the scope of the license are the same as those specified for the main product.
❓ Ask a Question
Have any doubts? Fill the form below and our team will respond shortly.


