BIS Certification for Electric Stoves

Get professional assistance for BIS certification for electric stoves IS 302 (Part 2/Sec 202):1992 in India. UMSPCS helps with documentation, testing and certification.

Home BIS ISI BIS Certification for Electric Stoves

BIS ISI Certification for Electric Stoves - IS 302 (Part 2/Sec 202):1992

In homes, commercial kitchens, and other locations where there is a need for consistent heat and safe electrical use, electric stoves are utilized. These appliances contain electrical components and heating elements, and their design and construction must comply with specified safety standards before they can be marketed in India under the relevant mandatory BIS scheme.

The particular standard which applies to Electric Stoves is IS 302 (Part 2/Sec 202):1992 - Safety of Household and Similar Electrical Appliances: Part 2 Particular Requirements, Section 202 Electric Stoves. This product is currently available in the Scheme-I (ISI Mark Scheme), and the Product Manual for this product specifically specifies the certification requirements for electric stoves.

The general requirements for household or similar electrical appliances are read in conjunction with the requirements of section 202. The electric stove is also exhibited in the existing certification and test information provided by BIS in the context of the product and laboratory.

UMSPCS offers end-to-end support for BIS ISI Certification for Electric Stoves, such as product applicability assessment, documentation, coordination of testing, BIS application filing, inspection preparation, and compliance support.

What Is BIS ISI Certification for Electric Irons?

BIS ISI Certification for Electric Irons certifies that the product covered meets the requirements of the applicable Indian Standard and BIS certification.

The current particular standard is IS 302 (Part 2/Sec 3):2024 / IEC 60335-2-3:2022 Household and Similar Electrical Appliances. Safety, Part 2: Particular Requirements, Section 3: Electric Irons. This is a product of Scheme I (ISI Mark Scheme).

The specific standard is used in conjunction with the general requirements given in IS 302 (Part 1). There were several changes made in the 2024 revision, such as requirements for accessible surface temperatures, marking and instructions, charging of metal-ion batteries, mechanical strength, and pressure protection.

🎉 Special Offer

~~₹499~~ FREE

Get Your Free Expert Consultation

The BIS testing process of electric stoves covers the following aspects:

Classification
Marking
Insulation against electric shock.
Power input and current
When the temperature increases or heats up.
Moisture resistance
Electrical insulation and electric strength.
Abnormal operation
Endurance
Mechanical strength
Stability and mechanical hazards
Overload-related requirements
The wiring and building inside.

The current laboratory scope of BIS explicitly states that it is testing to IS 302 (Part 2/Sec 202):1992 and specifies the clauses of the general requirements standard as applicable.

Why Does an Electric Stove Require BIS ISI Certification?

Electrical insulation, shock protection, temperature control, and safe construction are all important factors for electric stoves, which are a combination of heating elements and electrical circuits.

A BIS licence can assist the manufacturer in making a declaration of conformity to the safety requirements in the mandatory BIS certification framework that apply to the product.

BIS certification can help manufacturers to:

Meet applicable regulatory requirements.
Show compliance with applicable Indian Standards.
Enhance consumer and buyer confidence.
Create a common way of manufacturing and testing.
Support market acceptance of the product.
Reduce the risk of regulatory problems associated with non-compliant products.

Who Needs BIS ISI Certification for Electric Stoves?

The requirement applies to businesses that produce electric stoves that are subject to the relevant BIS certification system.

This generally includes:

Indian Manufacturers

Manufacturers producing covered electric stoves for the Indian market need to meet the applicable BIS requirements and obtain the required licence.

OEM and Contract Manufacturers

Manufacturers of other brands of electric stoves should review their certificate obligations with regard to their manufacturing and branding arrangements.

Brand Owners

The companies manufacturing electric stoves under their brand name should verify the compliance of electric stove products with relevant BIS standards before introducing them.

Foreign Manufacturers

The applicable BIS route may be required to be followed by the eligible foreign manufacturer supplying a covered electric stove to India.

Importers

The importers are required to ensure that the electric stoves they import comply with the necessary BIS requirements prior to commercial supply to India.

Where Are Electric Stoves Commonly Used?

Electric stoves are used in a variety of cooking situations where electrical cooking is desired and controlled.

Common applications include:

Residential kitchens
Hostels and dormitories
Office pantry areas
Small commercial kitchens
Hospitality facilities
Institutional kitchens
Temporary cooking setups
Other household and cooking uses

The actual suitability of an electric stove will depend upon its design, electrical rating, intended use, and applicable product requirements.

Why Do Some BIS Applications for Electric Stoves Get Delayed?

The certification of electric appliances includes product testing and technical documentation. If the product is not adequately prepared for application, testing, or assessment, then there can be unnecessary delays in the application.

Common reasons include:

Correcting product/standard identification errors.
Incomplete technical specifications.
Information on the product does not match the documents sent.
Missing calibration records.
Inadequate testing arrangements.
Failure in safety testing.
Lack of quality-control record-keeping.
Factory not ready for assessment.
Wrong model and/or variant scope.
Late responses to BIS observations.

Manufacturers should prepare their appliances and supporting documentation prior to sending samples to BIS, as they are subject to multiple safety-related test parameters in the laboratory.

Complete BIS ISI Certification Process for Electric Stoves

The process of BIS ISI Certification for Electric Stoves at UMSPCS is run on a structured approach to enable the manufacturers to get prepared for the product test and BIS assessment.

Step 1: Identification of Relevant Indian Standard

The first step is to find out which IS Code (Indian Standard) applies to the product.
This includes:

Product category analysis

Identification of a relevant IS code.

Review of compliance requirements.

Gap analysis of the manufacturing process.

Advice regarding the quality compliance of BIS.

Step 2: Product Testing and Document Preparation

To make sure the product satisfies the applicable standard, it must be tested in a laboratory testing facility that is both BIS-approved and NABL-accredited.
This stage includes:

Product sample testing

Technical documents should be prepared.

Technical documents need to be prepared.

Gathering of manufacturing information.

Quality documentation

Application form preparation

Step 3: Filing of the BIS Application

Once the tests and documentation are finished, the BIS application is submitted.
This involves:

Filling the BIS application

Providing lab test reports

Providing factory information

The government fees shall be paid.

The first check is done by BIS officials.

Step 4: BIS Factory Inspection

The BIS officials visit the manufacturing unit to ensure that it fulfils the requirements for certification.
In the course of the inspection, BIS assesses:

Manufacturing process

Production facilities

Quality assurance systems

In-house testing facilities

Product consistency

Step 5: Sample Testing and Laboratory Evaluation

BIS can take samples of products for testing at an independent laboratory during this inspection.
This stage includes:

Collection of samples by the BIS officials.

Laboratory testing

Technical evaluation of results

Laboratory Test Reports (LTR) must be submitted.

Step 6: Closure of Observations

Any observations identified during inspection and/or testing must be treated as corrective actions and must be taken before approval.
This may include:

Addressing BIS observations

Implementing corrective actions

Updating technical documents

Providing evidence of conformity

Closure of observations

Step 7: Paying Licence and Marking Fees

Once the compliance is verified successfully, the applicable BIS fee should be paid.
These include:

Annual licence fee

ISI marking fee

The BIS licence compliance conditions.

Step 8: Grant of BIS Licence

Upon successful completion of all the requirements, BIS issues an ISI certification licence.
Once the licence is issued:

An ISI mark can be applied to certified products.

The products can be legally manufactured and sold in India.

The manufacturers need to have continuous BIS compliance.

List of Documents ISI Certification for Electric Stoves

The actual list of documents will depend on the manufacturer and also on the scope of the product. Usually, the below-mentioned documents are required:

Below is the list of the general documents that are required for ISI certification by BIS:

General information about the manufacturing unit and the product range
Address proof of the manufacturing unit
Registration of the trademark of the brand name
Production licence/statutory clearances
Product drawings/descriptions
Installed capacity of the manufacturing plant
Material list with its specifications
Information about the manufacturing machine/equipment
Layout plan of the factory building
Detailed process of manufacturing flow
Information regarding internal testing equipment/calibration
Quality control personnel details
Factory organisation chart
Cost of ISI Certification by BIS

Cost of BIS ISI Certification for Electric Stoves

Many firms often ask about the cost of certification. The following factors determine the cost of certification:

Type of Product
Indian Standards of the product
Number of models
Test Parameters
Factory Audit
BIS Fees by Government
Consultancy Service Conditions

For calculating the cost of certification, one needs to perform an analysis since every product is different.

Particulars	Estimated Cost (INR)
Application Fees (BIS)	₹1,000
Testing Charges (Lab Fees)	15000- ₹2,50,000
Factory Inspection Charges	₹7000
Annual License Fees	₹1,000
Marking Fees (ISI Mark Usage)	As per BIS norms (based on production)
Consultancy Charges (UMSPCS)	₹ 50000

Call Today!

WhatsApp Now!

Timeline for BIS ISI Certification for Manufacturers

The time required for the whole approval process depends on several factors, such as:

Product complexity
Testing period
Documentation preparation
Approval process by BIS
Factory inspection
In general, the whole process will take about 30-40 days, but if everything is planned correctly, it will go faster.

How Can UMSPCS Help With BIS ISI Certification for Electric Stoves?

The process of obtaining BIS ISI Certification involves the involvement of product testing, technical documentation, manufacturing controls, and BIS procedures.

The following support is available at UMSPCS:

Product applicability assessment
This is a requirements review of IS 302 (Part 2/Sec 202).
Determine the value of the products and models.
Documentation preparation
Laboratory coordination
Product testing support
BIS application filing
Factory inspection preparation
BIS query handling
Corrective-action support
Post-certification compliance guidance

UMSPCS, with 600+ successful certifications and 6+ years of experience, has an effective solution to help manufacturers to handle the BIS certification requirements effectively.

Conclusion

The product falls under the specific safety standards laid down in IS 302 (Part 2/Sec 202):1992 (ISI), and the BIS framework of certification has recommended the product under the applicable Scheme-I safety standards. The Product Manual and BIS laboratory information provide specific instructions to prospective applicants and for testing of electric stoves.

Having a test report is just the first step for manufacturers in obtaining BIS certification. All products must be built properly, be electrically safe, have adequate heating performance, have adequate test equipment, be documented, and have adequate manufacturing controls aligned to the requirements.

Appropriate preparation of the product profiling and testing procedure may help to minimise unnecessary delays and facilitate a smoother BIS assessment.

BIS ISI Certification for Electric Stoves?

UMSPCS can help you with product suitability, IS 302 (Part 2/Sec 202) requirement analysis, testing coordination, documentation, BIS application process, factory inspection preparation, and certification compliance. Also get to know more information about BIS Certification for Electric Iron.

For assistance with your BIS ISI Certification for Electric Stoves, contact our BIS experts.

Frequently Asked Questions (FAQs)

The relevant Indian Standard is IS 302 (Part 2/Sec 202):1992 - Electric Stoves.

Electric Stoves come within the mandatory scope of the relevant BIS Scheme-I product certification scheme.

Tests may include electric shock protection test, power input test, heating test, moisture test, insulation test, electric strength test, abnormal operation test, endurance test, and mechanical test.

If required by Scheme-I, BIS evaluates the manufacturing facilities of the manufacturer.

Documents usually include product specifications, drawings, factory information, manufacturing and testing documents, etc.

UMSPCS helps you with product suitability analysis, documentation, testing coordination, BIS application, factory inspection preparation, and compliance services.

Ready to get your electronics BIS-registered?

+91 7011067811

BIS Certification for Electric Stoves