UMSPCS-Compliance

BIS ISI Certification for Glass Feeding Bottles

UMSPCS - BIS ISI Certification for Glass Feeding Bottles

BIS ISI Certification for Glass Feeding Bottles IS 5168

Looking BIS Certification for Glass Feeding Bottles from BIS Under IS 5168? Check the Complete Procedure Documents Required, & Cost with UMSPCS

  • BIS Registration Guidance
  • Application Filing Support
  • BIS Authority Coordination
  • Cost & Timeline Clarity
  • Complete Documentation Help
UMSPCS google rating new
Home / BIS ISI / BIS ISI Certification for Glass Feeding Bottles

Enter your details to receive a full quote and consultation

Service & blog Page Form

BIS ISI Certification for Glass Feeding Bottles as per IS 5168: Requirements and Process

A baby feeding bottle is not merely a vessel for infant nutrition. It is, in fact, a product that should meet certain basic requirements in various aspects like quality, safety, and durability. Compliance with necessary Indian Standards when launching glass feeding bottles in the Indian market is vital, particularly for manufacturers and suppliers of glass feeding bottles in India.

BIS Certification for Glass feeding bottles complies with IS 5168:2018, which is the first revision of the Indian Standard for glass feeding bottles. This product comes under Bureau of Indian Standards ISI product certification under the Scheme-I system. The purpose of the certification is to ensure that the bottles meet the conditions related to glass material, dimensions, thermal shock resistance, alkalinity, and other requirements. 

It is very important to know the certification process, the testing requirements, the documents needed, and licensing requirements for adherence to legal issues, even if you are a manufacturer of glass feeding bottles in India or want to supply them from abroad.

What Does BIS ISI Certification Mean for Glass Feeding Bottles?

BIS ISI Certification is an assessment method for product conformity whereby BIS evaluates whether a specific product meets the criteria set out in the corresponding Indian Standard. Once the manufacturer has obtained the license, they can apply the ISI Standard Mark on the goods specified in the license after all the necessary conditions have been fulfilled.

The Indian Standard applicable to glass feeding bottles is IS 5168:2018 - Glass Feeding Bottles, while the product manual with BIS describes the rules of testing, sampling, inspection, and quality control applicable to the certification procedure.

Glass feeding bottles fall under the purview of the Infant Milk Substitutes, Feeding Bottles, and Infant Foods (Regulation of Production, Supply, and Distribution) Act of 1992 and are also subject to mandatory certification executed by BIS under this Law.

UMSPCS Special Offer new
🎉 Special Offer
₹499 FREE

Get Your Free Expert Consultation

Popup Form

What is the Reason for Glass Feeding Bottles Getting BIS Certification?

Glass feeding bottles are instruments that are used for feeding infants, and therefore, the quality and safety of products being manufactured is of extreme importance. The paper states the rules the product must meet in order to prove conformity with the existing standard.

Key reasons for certification include:

  • Regulatory compliance
  • Product safety
  • Quality assurance
  • Market access
  • Consumer confidence

What Need is There for BIS ISI Certification?

The certification requirements can apply to various businesses that are engaged in the manufacturing and supply of glass feeding bottles.

  • Indian manufacturers
  • Foreign manufacturers
  • Assembly units
  • Importers and brand owners

An importer or distributor cannot expect that its business registration will take over the manufacturer's duties regarding product certification.

Scope of BIS ISI Certification for Glass Feeding Bottles

The extent of the certification is determined by the product requirements given in IS 5168:2018 and the details that have been approved under the BIS licence. Manufacturers must determine the bottle designs, capacities, and product variations which they plan to include in their application.

Before applying, businesses should consider:

  • Glass feeding bottles in various types and sizes are manufactured.
  • The product drawings, dimensions, and stated wall thickness.
  • The specifications of the material and the methods of manufacturing.
  • Required testing and inspection steps.
  • The range of products that have been suggested for inclusion in the licence.

By confirming the scope at an early stage, it can be guaranteed that the application and testing arrangements will correspond to the products intended for the Indian market.

BIS Certification for Indian Manufacturers

Indian manufacturers have to show that their methods of production and quality control are capable of consistently producing glass feeding bottles in accordance with IS 5168:2018.

Important considerations include:

  • Setting up appropriate manufacturing and inspection controls.
  • The facilities needed under the relevant scheme must be kept in operation.
  • We prepare the equipment calibration plans and test records.
  • Making sure that the product scope and the drawings correctly represent the bottles that are manufactured.
  • In accordance with the required procedures for sampling, marking, and inspection.

The product manual from the BIS provides different instructions regarding inspections and tests for companies that manufacture glass bottles themselves and for those assembly units which do not manufacture the glass bottles. The appropriate arrangement must be evaluated before proceeding.

BIS Certification for Foreign Manufacturers

Any foreign manufacturers who wish to supply glass feeding bottles to India should assess the requirements of the BIS Foreign Manufacturers Certification Scheme (FMCS) where they apply.

The overseas manufacturing plant has to show that it conforms to the appropriate Indian Standard and satisfies the relevant BIS licensing requirements; the process could include a factory inspection, product testing, a review of the documentation, and the appointment of an Authorised Indian Representative (AIR) as required by BIS.

Foreign applicants should pay particular attention to:

  • Manufacturer and factory documentation.
  • Evidence relating to product testing and conformity.
  • Provide the AIR appointment and the relevant documentation.
  • The fees for application, inspection, testing, and marking.
  • You must comply with the licence conditions if you are to use the ISI Mark.

Before organising commercial shipments, importers should check the certification status and the authorised product scope.

BIS ISI Certification Process for Glass Feeding Bottles

Step 1: Identify the Applicable IS Code

Before starting the application process, identify the relevant Indian Standard and certification requirements for glass feeding bottles.
  • Confirm IS 5168:2018 applicability.
  • Look at the product specifications and the bottle sizes.
  • Review applicable BIS requirements.
  • Identify compliance gaps.

    • Step 2: Product Testing and Documentation

    Get the product samples and the technical documents needed for certification ready. Testing should adhere to the relevant BIS procedure.
  • Product specifications and drawings.
  • Manufacturing and quality-control details.
  • Required sample testing.
  • Preparation of supporting documents.

    • Step 3: Submit the Application to BIS

    Send the application via the required BIS procedure together with the needed documents and the relevant fees.
  • Complete the application form.
  • Provide more information about manufacturing and products.
  • Send in the required test reports and documents.
  • Pay applicable application fees.

    • Step 4: BIS Factory Inspection

    When necessary, the BIS examines the manufacturing facility to check its production capabilities and quality-control measures.
  • Review manufacturing processes.
  • Look over the facilities used for production and testing.
  • Assess quality-control procedures.
  • Check that the quality of the product is consistent.

    • Step 5: Sampling and Laboratory Testing

    The product samples are tested in accordance with the requirements of IS 5168:2018 in order to assess conformity.
  • Sample collection as prescribed.
  • Testing against applicable parameters.
  • Evaluation of test results.
  • Submission of required reports.

    • Step 6: Closure of Observations

    Wherever the BIS finds deficiencies as a result of reviewing, inspecting, or testing the documents, the manufacturer must take corrective action.
  • Resolve technical issues.
  • Update documents where necessary.
  • Submit supporting evidence.
  • Complete required corrective actions.

    • Step 7: Payment of Licence and Marking Fees

    The applicant has to carry out the required licensing and marking procedures after satisfying the applicable requirements.
  • Pay applicable licence fees.
  • Complete marking-fee requirements.
  • Accept the licence conditions.
  • Follow applicable marking rules.

    • Step 8: Grant of BIS Licence

    When the application, the testing, and the relevant assessments are satisfactory, BIS will grant a licence for the use of the ISI Standard Mark for the scope of products that have been approved.
  • The ISI Mark should only be used with authorization.
  • Produce products within the scope that has been approved.
  • Make sure that compliance with BIS requirements is continued.

    • Documents Required: BIS ISI Certification for Glass Feeding Bottles

    The extent of the documentation needed will vary according to the method of manufacturing, the applicant, and the scope of the licence being proposed. Generally, the application will call for technical, manufacturing, and quality-control information.

    Commonly required documents include:

    • Basic information about the manufacturing unit and the product range
    • Proof of address of the manufacturing unit
    • Trademark certificate for the brand name
    • Manufacturing licence/certifications
    • Design drawings of the product
    • Total installed manufacturing capacity
    • List of materials and their specifications
    • Details of manufacturing machinery and equipment
    • Factory floor plan
    • Process flow in detail
    • Testing facilities with calibration details
    • Laboratory personnel details
    • Organogram of the factory

    When the BIS carries out its application review or factory assessment, it may ask for further information, and the documents should thus be prepared in accordance with the relevant product manual and the current BIS application requirements.

    Cost of BIS ISI Certification for Glass Feeding Bottles

    The cost of obtaining BIS ISI Certification for Glass Feeding Bottles in accordance with IS 5168:2018 will depend on the relevant government fees, the laboratory testing, the factory inspection, and the consultancy support needed for the application.

    Particulars Estimated Cost (INR)
    Application Fees (BIS)
    ₹1,000
    Testing Charges (Lab Fees)
    15000- ₹2,50,000
    Factory Inspection Charges
    ₹7000
    Annual License Fees
    ₹1,000
    Marking Fees (ISI Mark Usage)
    As per BIS norms (based on production)
    Consultancy Charges (UMSPCS)
    ₹ 50000
    Call Today!
    WhatsApp Now!

    How Long Does it Take to Get BIS Certification for Glass Feeding Bottles?

    The timeline for obtaining BIS Certification in India for glass feeding bottles depends on several factors, including:

    • Product complexity
    • Number of materials
    • Testing duration
    • Documentation preparation
    • Laboratory availability
    • BIS application processing
    • Factory inspection
    • Closure of any observations

    If the necessary documents, product samples, the arrangements for testing, and the manufacturing facilities are all ready, the process could take about 30 to 40 days; nevertheless, the actual time taken might differ according to laboratory availability, the time required for BIS processing, and any corrective actions that are needed.

    Common Challenges During BIS Certification for Glass Feeding Bottles

    Manufacturers could have trouble if the product or the manufacturing process has not been properly prepared for assessment.

    • Incomplete documentation
    • Testing failures
    • Insufficient testing arrangements
    • Unclear product scope
    • Incorrect marking

    By studying the relevant standard and the product manual at an early stage, manufacturers can deal with these problems before they submit their application.

    How UMSPCS Can Help with BIS ISI Certification for Glass Feeding Bottles

    UMSPCS offers consultancy concerning product compliance to manufacturers and companies that are dealing with certification requirements. The kind of assistance it provides can include determining the relevant standards, examining the documentation, arranging testing, preparing the information needed for the application, and helping with any questions related to certification.

    Our approach, which benefits from more than six years of experience and support regarding over 600 product compliance requirements, is to first get a good understanding of the product before proposing the certification route.

    Our support can include:

    • Product profiling and IS code identification
    • IS 14625 scope assessment
    • Product and material review
    • BIS documentation support
    • Laboratory coordination
    • Sample and testing guidance
    • Application preparation
    • BIS application support
    • Factory-readiness guidance
    • Query and clarification support
    • Post-application compliance assistance

    Conclusion

    To manage BIS ISI Certification for glass feeding bottles as per IS 5168:2018, one has to develop the technical documentation, run the tests for the products, monitor manufacturing processes appropriately, and comply with all the other BIS licensing requirements. Understanding these factors at the beginning of the process may ensure there are no problems with certification later.

    Looking to get BIS ISI Certification for glass feeding bottles?

    Contact UMSPCS now to arrange a free consultation and find out about the requirements for your product. Also, get to know more information about BIS Certification for High Alumina Refractory Cement.

    Frequently Asked Questions (FAQs)

     

    It doesn't have to be so; the scope of the licence and the way products are grouped are determined by the relevant BIS requirements, the bottle designs, the sizes, and the testing provisions.

    Under the product grouping and testing requirements in question, various capacities could be taken into account. The manufacturer should confirm the permitted scope with BIS.

     

    A factory assessment might be necessary in order to assess the manufacturing processes, the quality-control arrangements, and the testing facilities in accordance with the relevant certification procedure.

     

    The product manual contains important instructions regarding inspection, sampling, testing devices, and compliance with various aspects of Regulation IS 5168:2018.

     

    Before they receive permission to sell their products in India, producers and importers need to fulfill the requirements of BIS certification.

     

    Manufacturers need to adhere to the suitable ways for examining, keep the required records of testing, employ measuring tools when necessary, keep an eye on the state of the raw materials, and keep the records of the manufacturing process.

    Bis certification

    Ready to get your electronics BIS-registered?

    +91 7011067811

    ❓ Ask a Question

    Service & blog Page Form

    Services we Offer

    ISO Badge

    Get Free Expert Consultation

    Fill the form below and our team will contact you shortly.

    Popup Form
    Contact Page Form