BIS Certification for AC Static Watt Hour Meters

Learn about BIS certification for AC Watt Hour Meters in India. Get expert assistance Like UMSPCS with ISI Mark certification, testing, documentation, and BIS license requirements.

Home BIS ISI BIS Certification for AC Static Watt Hour Meters

BIS ISI Certification for AC Static Watt-Hour Meters (IS 13779) - Expert Compliance Services

A slight mistake in electricity meters can result in huge financial losses, billing issues, consumer complaints, and more. Regardless of whether they are used in households, commercial buildings, or any other places in industries, it is important that the electricity meters provide accurate measurements throughout their working lives. Low-quality meters or non-compliant meters pose threats to revenue generation and consumers' confidence in the utility companies.

In order to ensure the quality, safety, and performance of the products, the Government of India has made it compulsory to comply with the respective Indian Standards through the Bureau of Indian Standards (BIS) through the relevant Quality Control Orders (QCOs). It is illegal to manufacture, sell, import, and distribute the notified products without getting the required BIS ISI Certification.

If you manufacture single-phase AC static watt-hour meters or wish to introduce them in the Indian market, then BIS Certification for AC Static Watt-Hour Meters under IS 13779 is the compliance requirement.

UMSPCS makes the certification process easier for the manufacturers through identification of the respective standards, coordination for product testing, documentation, inspection, and certification.

What is BIS ISI Certification for AC Static Watt-Hour Meters?

Product BIS ISI Certification for AC Static Watt-Hour Meters is a mandatory product certification issued by the Bureau of Indian Standards (BIS) that ensures that the electricity meter conforms to the quality, safety, construction, performance, and accuracy requirements laid out under Indian Standard IS 13779.

The certification allows the manufacturer to apply the ISI mark to its products, showing that the product meets the requirements of BIS.

The certification ensures that the electricity meter provided to utility companies, government departments, industries, and consumers provides accurate measurements of electrical energy while ensuring uniform quality of the product.

For the manufacturer, BIS Certification in India is not only a legal requirement but also the confirmation of product credibility.

Understanding IS 13779: The Applicable Indian Standard

This standard specifies complete requirements with respect to:

Construction of the meter
Electrical specifications
Mechanical specifications
Resistance against climatic conditions
Accuracy requirements
Safety requirements
Electromagnetic compatibility
Quality control procedures
Marking and labeling specifications
Acceptance criteria

The purpose of this standard is to ensure that each ISI Certified Meter accurately measures electrical energy in terms of the required accuracy during its entire lifetime.

The manufacturers who wish to get BIS ISI Certification for AC Static Watt-Hour Meters should make sure that their products and processes meet all relevant requirements of IS 13779.

Products Covered Under IS 13779

This standard applies mainly to the following types of equipment:

AC Static Watt-Hour Meter (Single Phase)
Class 1 Static Energy Meters
Class 2 Static Energy Meters
Electricity Meter (Household Application)
Domestic Energy Meters
Utility Meters
Electronic Watt-Hour Meters
Static Energy Measuring Instruments

Manufacturers of such products must first acquire the relevant BIS license for AC Static Watt-Hour Meters prior to their sale in India.

Why is BIS Certification Mandatory for AC Static Watt-Hour Meters?

Electricity metering is vital for energy billing and revenue generation. Problems such as inaccurate and unreliable meters may lead to the following problems:

Erroneous billing of electricity
Disputes between customers
Loss of revenue
Inefficiency on the part of utilities
Hazards
Non-conformity with law
Product recall
Trade barriers

To avoid these problems, the Government of India requires conformity to the relevant BIS standard using Quality Control Orders (QCOs) and ensuring that only certified products reach the Indian market.

Key Aspects of BIS Certification for AC Static Watt-Hour Meters

The procedure of BIS Certification of AC Static Watt-Hour Meters is far more involved than mere product testing. Some of the major components of the process are:

Product Conformity
Testing at BIS-Recognized Laboratories
Capability of the Manufacturer
Inspection of the Factory
Compliance

Basic Requirements for BIS ISI Certification

Before applying for BIS ISI Certification for Indian Manufacturers, it is important for manufacturers to check whether they fulfill the basic requirements defined by BIS.

Generally, such requirements comprise:

An officially registered manufacturing unit
Infrastructure for manufacturing
Quality management system
Testing facilities as per BIS requirements
Technical manpower
Calibration of testing apparatus
Process of manufacture
Product drawing and specifications
Raw material quality assurance system
Adherence to the relevant Indian Standard

Non-fulfillment of the above-mentioned requirements could hamper the entire process of certification.

Eligibility Requirements for BIS Certification

In order to become BIS Certified in India, the individual applicant is required to fulfill the following eligibility requirements:

Manufacturing Unit
Product Compliance
Manufacturing Facility
Quality Control System
Laboratory Facility

Benefits of BIS Certification for AC Static Watt-Hour Meters

BIS Certification for AC Static Watt-Hour Meters makes far more sense than just compliance with rules. There are many business benefits that can help in establishing credibility and efficiency in your business.

Legal Right to Market
Gain Customer Credibility
Increase Product Efficiency
Create Business Opportunities
Reinforce Branding
Standardize Manufacturing Process

Complete Process for BIS Certification for AC Static Watt-Hour Meters (IS 13779)

Step 1: Identify the Applicable Indian Standard

AC Static Watt-Hour Meters need to be made according to the IS 13779 standards.
At this stage, manufacturers should:

Know the requirements of IS 13779

Design & manufacture the product according to BIS specifications

If necessary, upgrade the manufacturing process to meet the standard

Step 2: Testing and Documentation of the Product

The product needs to be tested in a BIS-recognized and NABL-accredited lab for IS 13779.
During this stage:

Testing of the product is done

Technical documentation is prepared

Factory and manufacturing information is collected

Application forms for BIS are completed

Step 3: Submitting the Application

After completion of testing and documentation, the application for BIS is submitted online.
Typically, the application will have:

Test reports from the laboratory

Factory and manufacturing information

All required documents

Applicable Government charges

The BIS examines the application.

Step 4: Factory Inspection by BIS

An inspection of the factory is carried out by BIS officials to ensure that the manufacturer is capable of producing the product.
During this inspection, BIS assesses:

Manufacturing Process

Manufacturing Facility

Quality Control System

Testing Facilities

Samples of the product can be taken for independent testing.

Step 5: Product Testing & Laboratory Report Submission

Product samples are tested in the approved laboratory. Following successful testing of the samples, the Laboratory Test Report (LTR) is sent to BIS for its technical assessment.

Step 6: Closure of Non-Conformities (If Any)

In case any non-conformities are found during the inspection and testing, the manufacturer is supposed to:

Take corrective measures

Send revised documents, if necessary

Address all observations made by BIS

The certification process is done only after closure of all non-conformities.

Step 7: Payment of License & Marking Fees

Upon successful technical evaluation, the manufacturer is supposed to pay:

BIS license fee

ISI marking fee

The license is issued after the required fees have been paid.

Step 8: Issue of ISI License

On fulfillment of all requirements, including testing, inspection, compliance, and payment of fees, the ISI License is issued by BIS.

Documents Required for BIS ISI Certification IS 13779

Even though there are different documentation requirements based on the individual and certification body, the manufacturer needs to have the following documents at hand:

Basic details of the manufacturing facility and the product category
Documentation for proof of the manufacturing facility address (title deed, utility bill, etc.)
Trademark registration certificate (if the product uses a brand name that is trademarked)
Manufacturing licence/statutory approvals (as appropriate – pollution control approvals, industry approvals, etc.)
Product design details
Installed manufacturing capacity
Material composition, with specifications
Details of the manufacturing machinery
Floor layout of the factory premises (production facilities and testing facilities, storage facility)
Detailed manufacturing process description is provided
In-house testing facility and calibration details
Quality control personnel details
Organizational chart of the factory

Providing complete and accurate documentation will fast-track the process.

Cost of BIS Certification for AC Static Watt-Hour Meters

The cost is not static for all companies. The total certification cost will be determined by various parameters such as:

Complexity of products
of products
Application fees of BIS
Costs of factory inspections
Documentation fees

Particulars	Estimated Cost (INR)
Application Fees (BIS)	₹1,000
Testing Charges (Lab Fees)	15000- ₹2,50,000
Factory Inspection Charges	₹7000
Annual License Fees	₹1,000
Marking Fees (ISI Mark Usage)	As per BIS norms (based on production)
Consultancy Charges (UMSPCS)	₹ 50000

Call Today!

WhatsApp Now!

Consultation with an experienced compliance consultant may help in estimating the costs correctly and avoiding any unwanted expenses due to mistakes in filling out the application or additional tests.

The time frame for the process differs and depends on many factors such as the quality of documentation, the schedule of laboratory tests, readiness of the product, and the work of BIS. On average, it takes 30 - 40 working days for Indian manufacturers to complete the whole process. Read more about: AC Watt Hour Meter BIS Certification

Common Challenges Faced by Manufacturers

Manufacturers usually do not realize how complicated the process of BIS certification is. The smallest mistakes may lead to delays, extra expenses on testing, or refusal of the application.

Some of the most widespread problems are:

Misinterpretation of the required Indian Standard
Design does not comply with IS 13779 standards
Lack of documents
Filling in the form incorrectly
Late lab test results
Non-conformity found during factory testing
Lack of quality control system
Problems with calibration of the equipment used for testing
Failure to answer BIS questions in time
No knowledge about BIS regulations

Professional advice will be useful in solving these problems.

Why Choose UMSPCS for BIS Certification?

BIS Certification in India demands technical knowledge, understanding of regulations, and proper coordination between laboratories and BIS. UMSPCS ensures that our clients from both domestic and overseas locations receive full support to become compliant with BIS Regulations in an easy manner.

Why Manufacturers prefer UMSPCS

Over 6 Years of Regulatory Experience
600+ Product Compliance Areas
Regulatory professionals with experience
Transparent support for certification
Quick completion of projects
Compliance support to customers
Project management in an end-to-end fashion
Support for manufacturers from India as well as overseas

Our mission is to assist companies in getting their certification done without any hassles.

Conclusion

Whether you are a start-up manufacturer, an already existing electrical equipment manufacturing firm, or an overseas exporter looking to penetrate the Indian market, BIS Certification for AC Static Watt-Hour Meters is a mandatory regulatory certification requirement.

Going through BIS certification procedures on your own without professional help can be quite difficult and cumbersome. Right from comprehending IS 13779 specifications to testing your products and completing other certification processes, each step requires perfection.

UMSPCS provides complete support in every phase of the BIS certification process. Let our professionals guide you in getting certified without any hassle.

Are you ready to get your BIS ISI Certification?

Contact UMSPCS today for expert guidance and end-to-end compliance support.

Frequently Asked Questions (FAQs)

Yes, BIS ISI Certification must be acquired for the product in case the product falls under the applicable Quality Control Order (QCO).

The relevant Indian Standard for AC Static Watt-Hour Meters is IS 13779, and it establishes the specifications regarding safety, performance, construction, and accuracy.

Any manufacturer, whether Indian or foreign, may apply for the certification. In case of a foreign manufacturer, they need to nominate their Authorized Indian Representative (AIR) as per the applicable BIS scheme.

Time taken depends on product testing, document submission, factory inspection, and BIS approval.

Company Registration, Manufacturing License, Product Specification, Test Report, Quality Control Documents, and BIS Application Forms.

The product is tested for accuracy, insulation resistance, no-load test, starting test, high voltage test, and mechanical endurance test.

BIS Consultant is useful in documentation, testing coordination, application submission, and BIS certification compliance. This will save time and reduce the chances of rejection.

Cost varies according to the type of products, testing requirements, BIS fees, factory inspection, and types of products.

Ready to get your electronics BIS-registered?

+91 7011067811

BIS Certification for AC Static Watt Hour Meters