UMSPCS-Compliance

BIS CRS Certification for Barcode Readers and Scanners

BIS CRS Certification for Barcode Readers and Scanners

Understand BIS CRS registration requirements for barcode readers and scanners. UMSPCS assist you with product testing, technical documentation, and applicable IS/IEC 62368-1 requirements.

UMSPCS google rating new
Home / bis_crs / BIS CRS Certification for Barcode Readers and Scanners

Enter your details to receive a full quote and consultation

Service & blog Page Form

BIS CRS Certification for CCTV Cameras & CCTV Recorders - IS 13252 (Part 1): 2010 & CCTV Security Requirements

Barcode readers and biometric scanners are of great importance in modern businesses, be it in the area of retail billing and warehouse management or in access control and identity verification. Yet, those manufacturers and importers who intend to launch these products in the Indian market should take into account more than just the functionality and performance of the products. Regulatory compliance must be considered an essential element when introducing covered electronic products into the market.

The procedure for obtaining BIS Certification for Barcode Readers and Scanners includes knowing the specific product category applicable, conducting the required laboratory tests, compiling the required documentation, and applying to the Bureau of Indian Standards (BIS) by submitting the application duly. Besides, foreign manufacturers should check the necessary specifications for foreign applicants and appoint an Authorized Indian Representative (AIR) if necessary.

The blog sets out the way in which BIS CRS Certification can be applied to electronic products, outlines the requirements set down in IS 13252 (Part 1):2010, describes the registration procedure, lists the documents that are needed, gives an estimate of the costs involved, and mentions the common difficulties to help manufacturers and importers effectively plan their compliance journey.

What Does BIS CRS Certification Mean for Barcode Readers and Scanners?

The BIS CRS Certification is a product registration system requiring that electronic and IT products that have been notified comply with the relevant Indian Standard before they are placed on the Indian market.

Registration of the specified barcode and biometric scanning products requires testing the products at a laboratory recognised by BIS and then submitting the necessary application together with the relevant documents to BIS.

The primary aims are to check that the product is safe, to confirm that it complies with the relevant standard, and to make sure that the products which have been registered meet the appropriate regulatory requirements.

UMSPCS Special Offer new
🎉 Special Offer
₹499 FREE

Get Your Free Expert Consultation

Popup Form

What Products are Included in IS 13252 (Part 1):2010?

The applicable product categories include:

  • Barcode readers that are powered by USB are used for capturing and transmitting barcode information.
  • Barcode scanners are used in retail, in warehousing, in logistics, and in inventory management.
  • Iris scanners are used for biometric identification and for access control.
  • Optical fingerprint scanners are used for the purpose of verifying and authenticating identity.

The government notification and BIS's CRS-related information specifically include these product categories; however, the precise classification of a given model should be ascertained before carrying out testing and registration.

What Do You Need BIS Certification for in India?

The requirement is relevant to manufacturers supplying covered products to the Indian market, including:

  • The barcode or biometric scanning equipment is produced by Indian manufacturers.
  • Manufacturers in overseas countries that export covered products to India.
  • People who import and companies that obtain products from overseas suppliers.
  • Those brands that are launching new models or new variants of their products will need to register them.

With regard to CRS, it is the manufacturer's responsibility to arrange for the registration; importers and distributors should therefore make sure that the relevant product, brand, and place of manufacture are properly covered prior to carrying out commercial distribution. Separate registrations might be necessary in the case of different manufacturing locations or brands.

End-to-End Process of BIS CRS Certification for Barcode Readers and Scanners

Step 1: Product Profiling & Identifying IS Codes

The Indian Standard codes suitable for a particular product are selected based on product attributes.
This avoids:
  • Misclassification of product
  • Testing problems
  • Rejection of application
  • Step 2: Product Testing & Laboratory Coordination

    Coordination is done with recognised laboratories for product testing.
    It includes the following:
  • Product testing
  • Preparing test schedule
  • Coordinating with BIS laboratories
  • Checking product conformity
  • Managing test reports
  • Step 3: Document Preparation

    We prepare all documentation.
    Documents to be prepared include the following:
  • Specifications of product
  • Circuit diagrams
  • Manual of operations
  • Manufacturing process
  • Quality control
  • Declarations & Affidavits
  • Step 4: BIS Application Filing

    Preparation & filing of application in the BIS portal.
    The steps taken here are as follows:
  • Filling out the application and submission.
  • Verification of documents
  • Conformity checking
  • The following is a list of answers to enquiries received by BIS.

    Step 5: Issue of BIS Registration

    If the BIS is successfully evaluated, then:
  • Issues IS CRS Registration Certificate
  • Gives each product, student, or situation a BIS R-number
  • The product has been legalised in India now.
  • Step 6: Product marking & labelling compliance.

    We assist companies to meet the BIS marking requirements.
    Steps include:
  • A range of products carrying the BIS standard mark will be available.
  • Display of R-numbers
  • Compliance with packaging
  • Product labelling guidelines
  • Step 7: Renewal & Ongoing Compliance Support

    We are available to help you after you register.
    Assistance includes:
  • Renewal of registrations
  • Update of models in the catalogue.
  • Support in surveillance
  • Updates on regulations
  • Documents Required: BIS CRS Certification for Barcode Readers and Scanners

    Having a full and consistent collection of documents will avoid any queries regarding the application and reduce processing delays. The specific checklist should be checked off again against the present BIS application requirements.

    Commonly required documents include:

    • Business Registration Certificate - Proof of company incorporation or legal entity
    • Product Details & Specifications - Complete technical information of the product
    • Test Reports - Issued by BIS-recognized labs confirming compliance
    • Trademark Certificate - Proof of brand ownership (if applicable)
    • Authorization Letter - For authorized signatory or representative
    • AIR Documents - Mandatory for foreign manufacturers appointing an Authorized Indian Representative

    The application, test report, and any supporting documents should all have the same product name, brand, model details, and manufacturer information. The BIS offers application instructions, forms, and document checklists via its official CRS portal.

    BIS CRS Certification Cost for Barcode Readers and Scanners

    The price for BIS CRS Certification of barcode readers and scanners varies according to the product category, the relevant Indian Standard, the laboratory testing required, the number of models, and the amount of documentation 

    CategoryTotal Cost (Excluding GST)
    Indian Manufacturer₹55,000 + GST
    Overseas Client₹90,000 + GST

    The true cost will depend on the product’s scope and testing needs.

    Activity

    Estimated Timeline

    Documentation Preparation

    5-7 Days

    Product Testing

    10-15 Days

    BIS Review & Approval

    7-10 Days

    Depending on how well the testing and documentation go, registration typically takes 20 to 30 days.

    BIS CRS Certification Timeline for Barcode Readers and Scanners in India

    The BIS CRS Certification process could take about 20 to 30 working days, on the condition that the documentation, product samples, laboratory testing, and the review of the application do not experience major delays.

    • Documentation: 5 - 7 working days
    • Product Testing: 10 - 15 working days
    • BIS Approval: 7 - 10 working days

     

    The amount owed could vary depending on the degree of testing done, the cost of the laboratory, different models, and other compliance requirements. It should be noted that these numbers are only an approximation and should be viewed as indicative estimates and not as fixed government fees; therefore, it is wise to get an updated quote before taking action.

    BIS CRS Certification Validity for Barcode Readers and Scanners

    Normally, the BIS CRS required validation time does not comply with the standard validity period of two years. The registration validity period, continuation in it, the renewal of the corresponding registration, or their results must be verified with current BIS CRS regulations and registration rules.

    In this regard, organizations should monitor the state of compliance with the registration status, comply with required marking rules, and carry out renewal and other procedures on time. Companies should also determine if any modifications in the brand name or model or changes in the manufacturing location necessitate new actions.

    BIS CRS Registration: Important Compliance Checks Before Application

    In order to get BIS Certification for Barcode Readers and Scanners, manufacturers should find out the official status of their product and collect the required technical data on the product before making the application.

    • Product classification
    • Applicable Indian Standard
    • Brand and model details
    • Manufacturing location
    • Testing readiness
    • Registration coverage

    Common Challenges During BIS CRS Registration for Barcode Readers and Scanners

    Several issues can delay registration or require additional work:

    • Choosing the incorrect product category or standard.
    • Filing incomplete or inconsistent information about the brand and model.
    • Using a test report that does not meet current submission rules.
    • Selecting a laboratory without first verifying its relevant testing scope.
    • There are missing declarations or no proof from the manufacturing unit.
    • Taking a look at the AIR requirements for qualifying foreign applicants.

    Making modifications to any model does not ensure that testing or a registration update is unnecessary.

    What Will Happen if the Barcode Scanner Model is Modified?

    If manufacturers change any part of the hardware, power supply, components, design, or model number, they could offer an upgraded barcode scanner. However, such changes need to be examined before the altered version of the barcode scanner is made or sold using a current BIS registration.

    It will depend on the nature of the change and on the relevant BIS requirements as to whether further testing, inclusion of the model, or a separate registration is necessary.

    Manufacturers should review the following before introducing a revised model:

    • Alterations to the product's construction or its electrical components.
    • Model numbers or variations by brand.
    • Alterations to the place of manufacturing.
    • The differences between the product as registered and the revised product.
    • The BIS procedures that apply to the inclusion of a model or to updates to its registration.

    Having a previous review carried out can help in deciding the right compliance action and in reducing the risk of using a registration which does not cover the modified product.

    How UMSPCS Can Help With BIS CRS Certification for Barcode Readers and Scanners

    UMSPCS provides support to manufacturers and importers throughout the major stages of product compliance. Because the team has more than six years of experience and expertise in relation to over 600 product compliance requirements, it can offer help with:

    • Determining the BIS CRS requirements and the Indian Standards.
    • Reviewing the product information and the relevant documents.
    • Coordinating laboratory testing requirements.
    • Preparing the registration documents and checking them.
    • Providing foreign manufacturers with the formalities related to AIR that apply.
    • Helping with questions about applications and keeping up with the registration process.

    The support needed depends on the product, where it is made, the state of the paperwork, and the BIS rules that apply.

    Conclusion

    The BIS CRS certification for barcode readers and scanners constitutes an important regulatory requirement for all products that are subject to mandatory registration rules. Before registering their products, manufacturers and importers will have to identify their product category; specify the relevant Indian Standard; get them tested in a BIS-approved laboratory; and compile the required documentation.

    This systematic approach eliminates documentation mistakes that may cause testing delays, making it more efficient for a smooth and quicker registration process. Companies also need to guarantee that the brand name, model number, and manufacturing information they register comply with all the relevant stipulations before entering the Indian market. Foreign manufacturers should likewise attend to the appropriate AIR and application requirements as early as possible.

    Considering Registering Barcode Readers or Biometric Scanners with the BIS CRS?

    Connect with UMSPCS to talk about your product, your documentation, your testing requirements, and your next steps.

    Also, I would like to learn more about BIS Certification for Adapters for Household & Similar Electrical Appliances and the related compliance requirements.

    Frequently Asked Questions (FAQs)

     

    The categories of USB-connected barcode readers, barcode scanners, iris scanners, and optical fingerprint scanners to which CRS requirements apply should be checked to ensure that the particular product does in fact belong to the relevant category.

     

    The product categories in question are given in IS 13252 (Part 1):2010, entitled Information Technology Equipment - Safety - General Requirements.

     

     

    The product having to comply with the mandatory CRS requirements means that the required registration must be completed before it can be legally introduced into the Indian market.

     

     

    The manufacturer submits a request for registration, and importers should work with the manufacturer to make sure that the appropriate product and brand are included.

     

    Foreign manufacturers can apply for CRS, provided that the relevant testing, documentation, and requirements regarding an Indian representative are met.

     

     

    Generally, foreign applicants who have no eligible liaison or branch office in India will have to nominate an AIR in accordance with the applicable BIS guidelines.

     

    Bis certification

    Ready to get your electronics BIS-registered?

    ❓ Ask a Question

    Service & blog Page Form
    ISO Badge
    Contact Page Form