UMSPCS-Compliance

BIS QCO for Fibre Ropes Polyamide 3 4 8 and 12 Strand Ropes

UMSPCS - BIS QCO for Fibre Ropes Polyamide 3 4 8 and 12 Strand Ropes

Indian Standard Compliance

BIS QCO for Fibre Ropes - Polyamide 3, 4, 8 and 12 Strand Ropes

Conformity Assessment & Regulatory Compliance

IS 4572:2020

03 Oct 2024

05 Jun 2026

Fibre ropes are commonly used in a variety of situations such as those found in the marine, fishing, industrial, construction, transportation, agricultural sectors and others where strength, flexibility, durability and resistance to operational loads are necessary. The Indian Standard that applies to polyamide fibre ropes regarding specific quality and performance requirements is IS 4572:2020.

The document known as Fibre Ropes - Polyamide - 3, 4, 8 and 12 Strand Ropes lays down the requirements concerning the construction, dimensions, mass, breaking force, elongation, workmanship, marking, and other relevant characteristics of polyamide fibre ropes.

Adhering to the appropriate Indian Standard enables manufacturers to keep their product quality steady and to show that they comply with the required specifications for regulated fibre rope products.

Requirements of Quality Control Order

Fibre ropes that are covered by the relevant Quality Control Order are required to comply with the mandatory provisions of the appropriate Indian Standard; the specified requirements relate to Fibre Ropes - Polyamide - 3, 4, 8 and 12 Strand Ropes - IS 4572:2020.

Any manufacturers, importers, and other companies that are involved in products falling within the notified scope must comply with the relevant BIS certification requirements. Before manufacturing, importing, supplying, or marketing their products, businesses should check what the latest QCO, Indian Standard, and BIS requirements are for their products.

Key Requirements under IS 4572:2020

Important product characteristics under IS 4572:2020 include:

  • The material used is polyamide fibre and includes the relevant specifications.
  • The construction of ropes follows general guidelines for standard 3, 4, 8, and 12 strand ropes, as well as uniform production methods.
  • In terms of dimensioning, there are brand restrictions regarding maximum dimensions in terms of diameter, linear density, or mass per unit length.
  • Mechanical properties: the minimum requirements in terms of breaking force and deformation.
  • Craftsmanship and surface treatment: this encompasses several aspects like surface quality, balance, lay requirements, and structural treatment.
  • Identification and packaging: guidelines for uniform signs and labels, as well as the use of protective packaging.

The specific requirements and acceptance criteria must be determined in accordance with the relevant provisions of IS 4572:2020 and the most recent BIS product manual. Testing of the product is carried out in order to verify compliance with the applicable physical and performance requirements of the standard.

Call Today!
WhatsApp Now!

Uses and Key Applications

Polyamide fibre ropes are utilized in a wide range of operational environments where durability, flexibility, high tensile strength, and resistance to shock loads are critical:

  • Marine and offshore operations involve the handling of mooring lines, towing lines, and offshore rigging operations.
  • Fishing and aquaculture involve the use of netting lines, trawling equipment, and the infrastructure of aquatic farms.
  • Industrial and material handling involve lifting, hauling, securing the cargo, and carrying out industrial utility operations.
  • In construction and with regard to infrastructure, care is taken with rigging, safety lines, structural tie-downs, and the transport of materials.
  • Transport and logistics involve cargo tie-downs, the securing of heavy equipment, and the use of transit utility.
  • In the field of agriculture, the equipment can be secured, load-bearing duties can be carried out, and heavy farming machinery can be tied down.

The suitability of a particular rope will vary according to its structure, size, breaking strength, and the purpose for which it is to be used.

Conformity Assessment under BIS Certification

Manufacturers must adhere to requisite conformity assessment procedure if there is need for BIS certification as the procedure involves testing of products, documentation creation, and also the factory assessment if required. The relevant BIS product certification framework specifies how compliance of manufactured products with the necessary Indian Standard should be determined. 

The certification requirement mandates manufacturers to have relevant manufacturing capabilities, process controls, quality control techniques, and relevant testing techniques. 

Importance of Compliance

By complying with relevant Indian Standard and QCO manufacturers can ensure that the quality of the products remains constant and all regulatory requirements are satisfied. Since fiber ropes are widely used in high-load and safety-critical operations, following strict adherence to quality standards will minimize the risks of product failure and ensure reliability of operation. 

Moreover, manufacturers must ensure that they keep records of production, quality control, and testing in line with the relevant BIS certification framework.

Timeline for BIS Certification

Entity Type Estimated Processing Time Key Workflow Steps
Indian Manufacturers Approximately 30 Days Application submission, in-house lab setup, factory inspection, sample testing, grant of licence.
Foreign Manufacturers Approximately 180 Days Appointment of AIR (Authorized Indian Representative), FMCS application, overseas factory audit, sample testing, grant of licence.
The length of time actually taken will vary according to the complexity of the application, the laboratory testing timetable, the factory's assessment requirements, and any questions or further explanations asked during the certification process.

Conclusion

Polyamide fibre ropes are essential materials found in numerous applications including marine, industrial, construction, fishing, and other activities where the fibers are required to be strong, flexible, and durable. The Indian Standard IS 4572:2020 describes the necessary quality aspects of 3, 4, 8, and 12 strand polyamide rope varieties in terms of construction and performance specifications.

Manufacturers, importers, and suppliers need to understand the applicable Indian Standards, Quality Control Orders, as well as the requirements mentioned in the Bureau of Indian Standards,s while producing, importing, and selling these regulated products.

If companies want the latest advice on BIS standards, Quality Control Orders, certification procedures, and other product compliance requirements, they can obtain professional regulatory and standards-related assistance from UMSPCS.

Read more also: BIS QCO for Fibre Ropes of Polyester Polyolefin Dual Fibres

Frequently Asked Questions (FAQs)

The fibre ropes made of polyamide with 3, 4, 8 and 12 strands are covered by IS 4572:202; this standard lays down the requirements concerning their construction, dimensions, performance, workmanship and the tests that apply.

The standard sets out the quality and performance requirements for polyamide fibre ropes, enabling manufacturers to keep their product quality consistent and to comply with the relevant requirements.

The standard includes within its range polyamide ropes having three, four, eight and twelve strands and lays down the requirements concerning their construction and performance.

Where testing is required as specified in the relevant BIS conformity assessment scheme, the products have to be tested against the requirements of IS 4572:2020 by means of the prescribed testing route.

Foreign manufacturers who are eligible can apply under the relevant BIS certification framework (FMCS) and may have to meet further requirements, including those relating to the Authorized Indian Representative (AIR) where this applies.

In cases where BIS certification is required, not complying with the relevant QCO and BIS requirements could impact the manufacturer's legal ability to manufacture, import, supply, or sell the regulated product in India.

Our Clients

New-Project-samsung
Havells with umspcs
New-Project-panasonic
New-Project-yealink
New-Project-cosco
North-western-railway-new
fsp new projeect
New-Project-ozone
New-Project-nilkamal
New-Project-modi
New-Project-winmate
New-Project-betopper
New-Project-1-butterfly
New-Project-preethi
New-Project-boston
New-Project-lepu
View All

Latest Blogs and News

The tips and updates given by our company’s BIS certification consultant expert have been shared in our blogs as a trusted BIS Certificate Consultant in India.

Ready to Grow Your Business?

+91 7011067811

biscro.customercare@umspcs.in

Facebook Instagram Linkedin Youtube X-twitter Pinterest

❓ Ask a Question

Service & blog Page Form

Services we Offer

ISO Badge

Get Free Expert Consultation

Fill the form below and our team will contact you shortly.

Popup Form
Contact Page Form