Looking for a reliable BIS ISI Consultant in Rajasthan? UMSPCS provides expert assistance for BIS ISI Mark registration, product testing, documentation, and compliance services across India.
ISI Consultant in Rajasthan
- Assistance for BIS Application Filing
- Local Co-ordination with BIS Authorities
- Clear Cost & Timeline Estimates
- Compliance Support after BIS Approval
- Complete Documentation Support
We offer our assistance both at the national and international levels without considering your manufacturing area.
BIS ISI Certification Consultant in Rajasthan: Complete Guide & Compliance Support
- Legally binding: There are many products that come under the purview of mandatory BIS regulations.
- Market Acceptability: BIS-certified products gain acceptance from consumers as well as dealers.
- Quality Certification: BIS provides standards for quality.
- Eligibility for Government Tenders: Most of the government tenders ask for products with BIS certification.
- Competitive Edge: BIS-certified products have a better position in the market than those without certification.
- Consumer Safety: Consumer safety is guaranteed through BIS certification.
- Identification of product standards
- Assessment for BIS application eligibility
- Preparation of documentation
- Coordination for laboratory testing
- Application submission
- BIS queries management
- Assistance in factory audit
- Foreign manufacturer representation
- CRS registration
- Grant of license assistance
- Renewal & surveillance
- Compliance management
Step 1: Identification of Relevant Indian Standard
Step one involves identifying the relevant Indian Standard (IS code) for the product.
Steps involved in this phase include: Product Category Analysis Identifying the relevant IS code Reviewing the compliance criteria Conducting gap analysis for the manufacturing process Guiding through BIS quality requirement compliance
Step 2: Product Testing and Documents Preparation
The product needs to be tested in a BIS-approved laboratory that is also NABL-accredited to comply with the relevant standard.
Steps involved in this phase include: Testing of the product sample Preparing technical documents Gathering manufacturing details Quality documentation Form preparation
Steps involved in this phase include:
Step 3: Filing of the BIS Application
After completing testing and documentation, the BIS application needs to be filed.
Steps involved in this phase include: Filing of BIS application Submittal of test report Submittal of factory information Government fee payment Initial scrutiny by BIS officers
Steps involved in this phase include:
Step 4: BIS Factory Inspection
An inspection at the manufacturing site is done by BIS authorities to ensure that all certification requirements are met.
BIS assesses during the inspection: Manufacturing process Production facilities Quality assurance systems Testing facilities in-house Consistency in the products
BIS assesses during the inspection:
Step 5: Sample Testing and Laboratory Evaluation
Samples of the product can be taken during the inspection and verified independently.
This phase consists of: Sampling by BIS officers Laboratory test on the samples Technical evaluation of the results Submissions of Lab Test Reports (LTR)
This phase consists of:
Step 6: Closure of Observations
In case there are any observations made through the inspection or testing, remedial actions will have to be taken.
This may involve: Addressing BIS observations Taking corrective action Updating technical documentation Submission of proof of compliance Closing of observations
This may involve:
Step 7: Payment of License and Marking Fees
After compliance verification is successful, it is important to pay the required BIS charges.
The following are some of the charges that need to be made:Annual Licence Fee Payment ISI Marking Fee Payment Compliance with the BIS Licence Conditions
The following are some of the charges that need to be made:
Step 8: Issue of BIS Licence
On successful completion of all the processes, the BIS issues the certificate licence.
Once the licence is issued: The ISI mark can be put on the licensed products The products will be able to sell in India Ongoing compliance will be required by the manufacturers
UMSPCS gives complete assistance during every phase of the BIS certification process for manufacturers in Rajasthan.
Once the licence is issued:
- Basic details of the manufacturing unit & the product segment
- Address proof of the manufacturing unit (property ownership deed/lease deed/utility bill, etc.)
- Trademark certificate of the brand name (if the brand name is being used and is registered)
- Manufacturing licence/statutory clearances (if any, e.g., pollution control clearance, etc)
- Product drawings/design specifications
- Installed manufacturing capacity
- Material list used and its specifications
- Details of manufacturing machinery/equipment used
- Floor layout of the factory premises (production/test/storeroom area)
- A detailed manufacturing process flow is included
- Internal test equipment and calibration information
- Quality control manpower information
- Organisational chart of the factory
| Particulars | Estimated Cost (INR) |
|---|---|
Application Fees (BIS) |
₹1,000 |
Testing Charges (Lab Fees) |
15000- ₹2,50,000 |
Factory Inspection Charges |
₹7000 |
Annual License Fees |
₹1,000 |
Marking Fees (ISI Mark Usage) |
As per BIS norms (based on production) |
Consultancy Charges (UMSPCS) |
₹ 50000 |
BIS Certification Consultant in Bhiwadi
UMSPCS offers complete assistance in obtaining BIS certification for manufacturers in Bhiwadi, including product testing, documentation, application submission, audits and licences.
Industries that we serve in Bhiwadi Electronic products Steel products Auto parts Machinery Consumer products Construction materials And more
Industries that we serve in Bhiwadi
BIS Certification Consultant in Neemrana
UMSPCS is an expert BIS ISI Certification Consultant in Neemrana that helps manufacturers in Neemrana obtain BIS certifications smoothly by complying with all the necessary Indian standards and regulations.
Our Services for Neemrana Manufacturers BIS ISI Certifications BIS CRS Certifications for electronic products FMCS Certifications for foreign manufacturers Product Testing Services Documentation BIS audit assistance Licence renewals and compliances
No matter whether you are a local manufacturer or an international company in Neemrana, UMSPCS assists you in getting your BIS certificates in an easy manner to ensure market access all across India.
Our Services for Neemrana Manufacturers
Frequently Asked Questions (FAQs)
Yes, in case the goods have to conform to the standards of BIS certification, which are mandatory, the same will be mandatory irrespective of the source from where the goods come, i.e., even from Rajasthan.
It will take around 30 to 40 days to get BIS certification, depending on the BIS certification scheme.
Yes, startups and MSMEs, along with big manufacturers, can obtain BIS certification if they fulfil applicable criteria.
Yes, for products that fall under mandatory BIS regulations, certification will be necessary prior to importation and sale in India.
ISI certification usually applies to those products that fall under mandatory Indian standards requiring a license, whereas CRS registration usually applies to electronics and IT products.
BIS certification services are mostly sought by manufacturers in cities like Jaipur, Jodhpur, Bhiwadi, Alwar, Neemrana, Kota, Bhilwara, Udaipur, Ajmer and many others in Rajasthan.
