UMSPCS-Compliance

BIS ISI Certification for Plastic Feeding Bottles

UMSPCS - BIS ISI Certification for Plastic Feeding Bottles

BIS ISI Certification for Plastic Feeding Bottles

Looking BIS ISI Certification for Plastic Feeding Bottles as per IS 14625? Know mandatory requirements, testing process, factory audit, timeline, costs, and certification with UMSPCS.

  • BIS Registration Guidance
  • Application Filing Support
  • BIS Authority Coordination
  • Cost & Timeline Clarity
  • Complete Documentation Help
UMSPCS google rating new
Home / BIS ISI / BIS ISI Certification for Plastic Feeding Bottles

Enter your details to receive a full quote and consultation

Service & blog Page Form

BIS ISI Certification for Plastic Feeding Bottles as per IS 14625

Although a feeding bottle is a small item, when it is being used for infants, concerns about the safety of the materials, hygiene, durability, and the quality of the product become much more important than considerations of appearance or price.

For any manufacturers and importers who are involved in the business of plastic feeding bottles in India, adherence to the relevant Indian Standard is not merely a matter of quality preference. The standard IS 14625:2015 - Plastics Feeding Bottles (First Revision) is included in the mandatory certification list by BIS and falls within the regulatory framework that applies to infant milk substitutes, feeding bottles and infant foods.

BIS ISI Certification of plastic feeding bottles is an important requirement with regard to compliance for any business that manufactures or supplies these products in the Indian market.

UMSPCS assists manufacturers in understanding the relevant requirements, in coordinating the testing, in preparing the documentation, and in managing the BIS certification process from the stage of applying through to compliance with the licence conditions.

What Does BIS ISI Certification Mean for Plastic Feeding Bottles?

The BIS ISI Certification for plastic feeding bottles is the conformity assessment procedure by which a manufacturer shows that its plastic feeding bottles meet the requirements of IS 14625:2015 and the relevant BIS certification procedures.

The product manual from the BIS lists the product as Plastics Feeding Bottles in accordance with IS 14625:2015 and includes advice on sampling, grouping, testing facilities, the scope of the licence, and the requirements for inspection and testing.

After the relevant BIS licence has been granted, the manufacturer may use the prescribed BIS Standard Mark (ISI Mark) within the scope approved and under the conditions of the licence.

This is especially important since feeding bottles come into contact with infant food or liquids. Compliance therefore goes well beyond checking the dimensions; it also includes requirements relating to physical characteristics, materials and tests concerning migration.

UMSPCS Special Offer new
🎉 Special Offer
₹499 FREE

Get Your Free Expert Consultation

Popup Form

Why is BIS Certification Required for Plastic Feeding Bottles?

Since plastic feeding bottles are closely linked with feeding infants, the safety of these products is a major issue for regulators.

The BIS has classified the IS 14625:2015 standard on plastic feeding bottles as an Indian Standard under the mandatory BIS certification provisions set out in the Infant Milk Substitutes, Feeding Bottles and Infant Foods (Regulation of Production, Supply and Distribution) Act, 1992; it therefore follows that businesses should not regard the ISI Mark simply as a marketing symbol.

For instance, suppose a manufacturer is making a polypropylene feeding bottle in three different capacities and selling it via distributors all over India. Even if the bottle appears to be sturdy and has passed the manufacturer's own quality inspections, those inspections by themselves do not prove that it conforms to BIS standards. The manufacturer has to take into account the relevant IS 14625 requirements and go through the BIS certification process. At this stage, professional compliance assistance proves to be valuable.

What Does Standard IS 14625 Include?

The standard, together with the relevant BIS testing requirements, covers a number of characteristics of plastic feeding bottles.

Depending on the applicable product configuration and testing plan, requirements can include:

  • Product description, design, shape and dimensions
  • Manufacturing workmanship, finish and appearance
  • Wall thickness
  • Capacity
  • Transparency
  • Leakage resistance
  • Drop resistance
  • Ageing resistance
  • Compressive deformation resistance
  • Resistance of printed containers
  • Environmental stress crack resistance
  • Material identification
  • Bisphenol-A-related requirements
  • Migration of certain elements
  • Migration testing
  • Specific migration requirements
  • Packing and marking

The BIS laboratory information for the standard IS 14625:2015 includes testing parameters such as wall thickness, capacity, transparency, leakage, drop testing, ageing resistance, resistance to compressive deformation and resistance to printed containers, as well as tests relating to material and migration.

The tests that are appropriate for a product should be decided upon in accordance with the most recent standard, the amendments to that standard, the relevant provisions in the product manual, and the manufacturer's suggested scope.

Material Compliance Is a Critical Part of Certification

A factor that can cause the BIS Certification of feeding plastic bottles to be complicated is the material employed in their manufacture.

The product manual from the BIS says that samples of feeding bottles produced from each type of material which is intended to be covered by the licence might have to be tested whenever a licence is being granted or when that type of material is included. The guidance on grouping specifically mentions materials such as PP/PES and other olefin-based polymers or co-polymers as applicable according to IS 14625.

It therefore follows that a manufacturer must not suppose that a single bottle which has been tested applies to all different types of material.

Key Testing Requirements for IS 14625 Certification

One of the most important stages in securing BIS ISI Certification for plastic feeding bottles is testing.

The laboratories that are listed by the BIS have testing requirements based on IS 14625:2015 for both physical and chemical/migration-related parameters.

Physical and performance testing

The testing framework can involve parameters such as:

  • Wall Thickness
  • Capacity
  • Leakage Test
  • Drop Test
  • Ageing Resistance
  • Compressive Deformation Resistance
  • Environmental Stress Crack Resistance
  • Transparency and Printed Surface Resistance

They are not simply routine formalities since if any one of the key parameters fails, it may result in further testing, in taking corrective action, or in a redesign before certification can go ahead.

Chemical Safety and Migration Testing

Since feeding bottles are in contact with the food or liquids that are given to infants, safety in terms of the materials used is of great importance.

BIS laboratory information for IS 14625 includes migration-related testing for elements such as:

  • Arsenic
  • Chromium
  • Mercury
  • Cadmium
  • Lead
  • Barium
  • Selenium

The testing also involves carrying out migration tests using the specified media and the particular migration conditions for various substances, including barium, cobalt, copper, iron, lithium, manganese, zinc, and antimony.

The equipment and layouts connected with migration testing and material-related testing are also specified in the 2023 BIS product manual.

The Plastic Feeding Bottle Testing in accordance with IS 14625 should therefore be carefully planned rather than regarded as a simple product inspection.

BIS ISI Certification Process for Plastic Feeding Bottles

Step 1: Identify Applicable IS Code

Find the standard and the certification requirements that apply to the product.
  • Product and material assessment
  • Identification of IS 14625:2015
  • Compliance and gap analysis
  • Review of BIS requirements

    • Step 2: Product Testing & Documentation

    Have the product samples tested by an appropriate laboratory that is recognized by BIS and get the necessary documents ready.
  • Product sample testing
  • Technical specifications and drawings
  • Manufacturing details
  • Quality-control documents
  • Application preparation

    • Step 3: Submit Application to BIS

    Send in the full application together with the supporting documents and the relevant fees.
  • BIS application filing
  • Test report submission
  • Factory details
  • Payment of applicable fees
  • Initial BIS scrutiny

    • Step 4: BIS Factory Inspection

    The officials from the BIS visit the manufacturing plant to check that it is complying.
  • Manufacturing process
  • Production facilities
  • Quality-control system
  • Testing facilities
  • Product consistency

    • Step 5: Sampling & Laboratory Testing

    The BIS could collect samples so that they might be evaluated by an independent laboratory.
  • Sample collection
  • Laboratory testing
  • Test-result evaluation
  • Submission of LTR

    • Step 6: Closure of Observations

    Before approval, any observations or non-conformities must be dealt with.
  • Corrective actions
  • Document updates
  • Submission of compliance evidence
  • Closure of observations

    • Step 7: Payment of Licence and Marking Fees

    Once compliance has been achieved, the relevant BIS fees must be paid.
  • Licence fee
  • Annual fee, where applicable
  • ISI marking fee
  • Licence conditions

    • Step 8: Grant of BIS Licence

    When all the requirements have been successfully completed, the BIS will issue the licence.
  • ISI Mark can be used as permitted
  • Products can be manufactured and marketed as per the approved scope
  • Continuous BIS compliance must be maintained

    • Documents Required for BIS ISI Certification

    The exact documentation may vary according to the manufacturer and application, but commonly required information can include:

    • Basic information of the manufacturing unit and the product range
    • Proof of address of the manufacturing unit
    • Trademark certificate for the brand name
    • Manufacturing licence/certifications
    • Design drawings of the product
    • Total installed manufacturing capacity
    • List of materials and their specifications
    • Details of manufacturing machinery and equipment
    • Factory floor plan
    • Process flow in detail
    • Testing facilities with calibration details
    • Laboratory personnel details
    • Organogram of the factory

    The manufacturer must make sure that the information submitted to BIS is consistent when looked at in the application, the drawings, the product samples, and the factory records.

    Cost of BIS ISI Certification for Plastic Feeding Bottles

    There is no fixed one-off cost for BIS ISI Certification of plastic feeding bottles in accordance with IS 14625:2015; the final cost varies according to several factors, including:

    Particulars Estimated Cost (INR)
    Application Fees (BIS)
    ₹1,000
    Testing Charges (Lab Fees)
    15000- ₹2,50,000
    Factory Inspection Charges
    ₹7000
    Annual License Fees
    ₹1,000
    Marking Fees (ISI Mark Usage)
    As per BIS norms (based on production)
    Consultancy Charges (UMSPCS)
    ₹ 50000
    Call Today!
    WhatsApp Now!

    How Long Does it Take to Obtain BIS Certification?

    The timeline for obtaining BIS Certification in India depends on:

    • Product complexity
    • Number of materials
    • Testing duration
    • Documentation preparation
    • Laboratory availability
    • BIS application processing
    • Factory inspection
    • Closure of any observations

    The whole process usually takes about 30 to 40 days, on the condition that the necessary documents, samples, testing facilities and manufacturing arrangements are in place. Careful planning together with advice from qualified BIS consultants can help to reduce any unnecessary delays.

    BIS Marking and Post-Certification Compliance

    Obtaining a BIS licence is not the last step in terms of compliance. Once the manufacturer has been certified, they still have to comply with the relevant BIS requirements, such as keeping up production quality, maintaining their testing arrangements, observing the marking regulations, and fulfilling any other conditions connected with the licence.

    The product manual from the BIS includes guidance on inspections and testing, and the section on grouping specifies that while the licence is in operation, the different types of covered products should be selected for independent testing in rotation.

    What this indicates is that manufacturers should have an ongoing compliance system rather than adopting a one-off approach.

    Benefits of Selecting UMSPCS for the BIS ISI Certification of Plastic Feeding Bottles

    The correct first attempt at obtaining BIS ISI Certification for plastic feeding bottles needs to involve coordination between the product requirements, the testing, the documentation, and the BIS procedures.

    UMSPCS is a consultancy firm owned by BIS and provides businesses in India with assistance concerning regulatory and product-certification requirements.

    With 6+ years of experience and support covering more than 600 product compliance requirements, our method involves first understanding the product before suggesting the certification route.

    Our support can include:

    • Product profiling and IS code identification
    • IS 14625 scope assessment
    • Product and material review
    • BIS documentation support
    • Laboratory coordination
    • Sample and testing guidance
    • Application preparation
    • BIS application support
    • Factory-readiness guidance
    • Query and clarification support
    • Post-application compliance assistance

    For whoever is an Indian manufacturer, or a manufacturer based overseas who is entering the Indian market, or a business that is launching a new type of feeding bottle, the appropriate certification strategy can help to save time, cut down on unnecessary testing, and result in a more structured compliance process. Read more also: EPR Certification for E-Waste Management Service.

    Conclusion

    When it comes to a product used for feeding infants, compliance must never be treated as a simple matter of going through the required steps.

    From identifying the right IS 14625:2015 requirements through to choosing the suitable testing method, preparing the BIS application, and getting the manufacturing facility ready, each stage can have an effect on the success of the certification project.

    Should you intend to carry out BIS Certification for plastic feeding bottles, please provide us with your product details, the type of material used, the place where the bottles are manufactured, and the number of variants to UMSPCS. Our team will then be able to assist you in understanding the relevant requirements and in arranging the certification process in line with the scope of your product. Also, get to know more information about BIS Certification for Domestic Pressure Cooker.

    Begin your BIS ISI Certification process with UMSPCS today!

    Frequently Asked Questions (FAQs)

     

    BIS does list the IS 14625:2015 standard on plastic feeding bottles as one of those requiring mandatory certification, and manufacturers must secure the relevant BIS licence prior to marketing their products within the scope of the regulation.

    The relevant Indian Standard is IS 14625:2015, Plastics Feeding Bottles (First Revision), and the most recent amendments to it, as well as the requirements set out in the BIS product manual, should also be taken into account.

     

    The certification scope may include materials that are permitted, such as PP, PES, and other materials covered by the standard and the BIS grouping requirements. Materials of each type intended for the licence will need appropriate sampling and testing.

     

    Yes, it could be the case; it all depends on the relevant grouping and scope requirements. Before determining the scope of the licence, the manufacturers should assess their materials, sizes, drawings, and the minimum wall thickness.

     

    There isn't a fixed overall cost since factors such as testing, the number of materials, different variants, laboratory charges, BIS fees, and factory requirements can all affect the total cost, and UMSPCS will be able to evaluate your product and give you a cost estimate tailored to that particular project

     

    Foreign manufacturers can indeed take the relevant BIS certification route in order to supply products that comply with Indian requirements; this process might require further documentation, a factory assessment, and some coordination.

    Bis certification

    Ready to get your electronics BIS-registered?

    +91 7011067811

    ❓ Ask a Question

    Service & blog Page Form

    Services we Offer

    ISO Badge

    Get Free Expert Consultation

    Fill the form below and our team will contact you shortly.

    Popup Form
    Contact Page Form