BIS Certification for Room Heaters

Learn about BIS certification and ISI Mark requirements for room heaters IS 302 (Part 2/Sec 30) in India. UMSPCS provides support for product testing, documentation and certification.

Home BIS ISI BIS Certification for Room Heaters

BIS ISI Certification for Room Heaters - IS 302 (Part 2/Sec 30): Process, Requirements & Cost

Room heaters are electric appliances that produce a lot of heat using mains power. Be it a fan heater, radiant heater, oil-filled radiator, panel heater or convector heater, safety from electric shock, overheating, fire, and mechanical damage is a must.

For manufacturers who provide covered room heaters in India, ISI Certification is essential on the basis of applicable Compulsory Certification for such products. The applicable Indian Standard for this is IS 302 (Part 2/Sec 30): 2007 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements, Section 30: Room Heaters. Currently, BIS has issued the Product Manual for the certification of products under Scheme-I of the BIS Conformity Assessment Regulations, 2018.

IS 302 (Part 2/Sec 30) Room Heaters are currently listed under the compulsory certification list of BIS for the relevant electrical appliance certification scheme.

UMSPCS offers end-to-end solutions to BIS ISI Certification for Room Heaters related matters such as product applicability assessment, coordination of testing, product documentation, BIS application filing, and factory inspection preparation and support for BIS licence.

What Is IS 302 (Part 2/Sec 30):2007 for Room Heaters?

IS 302-2-30:2007 lays down safety requirements for electric radiators or room heaters to be used in household and similar applications. The standard is the first revision and should be read in conjunction with the general requirements for the application section in IS 302-1.

The BIS Product Manual lists the following kinds of room heaters in the scope of certification:

Convector heaters
Fan heaters
Greenhouses and heaters for use in greenhouses.
Liquid-filled radiators
Panel heaters
Radiant heaters
Tubular heaters

This is not the only type of room heater that's applicable.

Other variables that are taken into account are the model number, appliance class, insulation class, pollution degree, material group, rated wattage, voltage, frequency, and phase.

🎉 Special Offer

~~₹499~~ FREE

Get Your Free Expert Consultation

Is BIS Certification Mandatory for Electric Irons in India?

Yes. BIS has introduced compulsory certification for room heaters following the IS 302 (Part 2/Sec 30):2007. According to the records of BIS, the standard is under Scheme-I, whereas according to the records of the historical implementation circular, the revised IS 302-2-30:2007 has been placed in the mandatory certification scheme under the Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003.

BIS 2026 compulsory-certification list still lists Room Heaters as per IS 302 (Part 2/Sec 30).

Therefore, manufacturers should check the scope of the product and current requirements of BIS before manufacturing and supplying covered room heaters to India.

Who Needs BIS ISI Certification for Room Heaters?

The manufacturers who may be subject to the certification requirement include those who manufacture covered room heaters for sale in India, such as:

Indian room-heater manufacturers
Electrical appliance manufacturers
Fan-heater manufacturers
Radiant-heater manufacturers
Oil-filled radiator manufacturers
Panel-heater manufacturers
OEM/contract manufacturers
Foreign Manufacturers supplying Covered products to India

The scope of the certification should be determined based on product design, rating, type and applicable grouping requirements.

Where Are Room Heaters Used?

The most common applications of the room heater are:

Residential homes
Apartments
Offices
Hotels
Schools and institutions
Commercial premises, commercial buildings, shops
Healthcare facilities
Office and office/warehouse buildings
Greenhouses, where applicable

These appliances are subject to thermal, electrical and mechanical stresses, so protection in these areas is important.

BIS ISI Certification Process for Room Heaters

At UMSPCS, we have a systematic procedure for manufacturers to get BIS ISI Certification for room heaters

Step 1: Identification of Relevant Indian Standard

This phase involves the following steps:

Analysis of Product Categories

Finding the appropriate IS code

Examining the requirements for compliance

Gap analysis for the manufacturing process

Leading the way in meeting BIS quality requirements

Step 2: Product Testing and Document Preparation

To meet the applicable standard, the product must be tested in a laboratory that is both NABL-accredited and BIS-approved.
This phase involves the following steps:

Examining the product sample

Compiling manufacturing information

Form preparation

Step 3: Filing of the BIS Application

After completing testing and documentation, the BIS application needs to be filed.
Steps involved in this phase include:

Filing of BIS application

Submittal of test report

Submittal of factory information

Initial scrutiny by BIS officers

Step 4: BIS Factory Inspection

An inspection of the factory is carried out by the BIS authorities to ensure that all the requirements for certification are met.
BIS inspects for:

Manufacturing process

Production facilities

Quality assurance systems

In-house testing facilities

Product consistency

Step 5: Sample Testing and Laboratory Evaluation

Samples of the product can be collected during inspection and tested independently.
This step includes:

Sampling by the BIS officers

Tests conducted on samples in the laboratory

Evaluation of test results

Submissions of Lab Test Reports (LTR)

Step 6: Closure of Observations

In case there are any observations made through the inspection or testing, remedial actions will have to be taken.
This may involve:

Addressing BIS observations

Updating technical documentation

Submission of proof of compliance

Closing of observations

Step 7: Payment of License and Marking Fees

After compliance verification is successful, it is important to pay the required BIS charges.
The following are some of the charges that need to be paid:

Annual Licence Fee Payme

Compliance with the BIS Licence Conditions

Step 8: Issue of BIS Licence

On successful completion of all the processes, the BIS issues the licence certificate.
Once the licence is issued:

The ISI mark can be put on the licensed products

The products will be able to be sold in India.

Ongoing compliance will be required by the manufacturers.

UMSPCS gives complete assistance during every phase of the BIS ISI certification process for manufacturers.

Documents Required for BIS ISI Certification for IS 302

However, the specific documents needed will vary depending on the product and the certification scheme.

The list of generally required documents includes:

Basic information about the product segment and the manufacturing facility
Proof of the manufacturing Address of the unit, such as a utility bill, lease, or property ownership deed
The brand name's trademark certificate
Manufacturing licences and any applicable statutory clearances
Design specifications and product drawings
Manufacturing capacity installed
List of materials used and their specifications
Information about the equipment and machinery used in manufacturing
The factory's floor plan, including the production, test, and storage areas
Included is a thorough manufacturing process flow.
Internal test apparatus and calibration data
Information on quality control personnel
The factory's organisational chart

BIS ISI Certification Cost for IS 302

A lot of manufacturers enquire about the cost of certification. The total cost would depend on:

Product type
Indian standard applicable to the product
Number of models
Testing requirements
Factory audit requirements
Government BIS fees
Requirements for consultant services

Particulars	Estimated Cost (INR)
Application Fees (BIS)	₹1,000
Testing Charges (Lab Fees)	15000- ₹2,50,000
Factory Inspection Charges	₹7000
Annual License Fees	₹1,000
Marking Fees (ISI Mark Usage)	As per BIS norms (based on production)
Consultancy Charges (UMSPCS)	₹ 50000

Call Today!

WhatsApp Now!

BIS ISI Certification Validity for IS 302

The validity of the certificate depends on the certification system.

ISI Licence: Generally valid for the time stipulated by the BIS regulations.
CRS Registration: Valid for 5 years.
Certification of Foreign Manufacturers: Valid according to BIS licensing and renewability provisions.

Manufacturers have to make sure that their certificates are renewed in time to ensure production and sales continuity.

Key Testing Requirements Under IS 302

A comprehensive list of electrical, thermal, and mechanical safety issues is covered in the standard.

Examples of tests include:

Protection from access to living parts.
Power consumed and current.
Heating
The leakage current and electric strength.
Moisture resistance
Provision for earthing
Hazard of stability and mechanical hazards.
Mechanical strength
Construction
Internal wiring
Components
Connect and provide flexible cords
Terminals
Clearances distance and solid insulation
Fire and heat resistance.
Resistance to rusting
Hazard of radiation, toxicity, etc.

Common Reasons for BIS ISI Certification Delays

Delays can occur for manufacturers due to:

Incorrect product grouping
Incomplete technical documents
Product samples not matching submitted specifications
Testing failures
Missing calibration records
Inadequate testing facilities
Incorrect rating information
Incomplete quality-control records
The following may be due to a factory that is not in inspection status:
Time-lagged response to BIS observations

Why Choose UMSPCS for BIS ISI Certification?

UMSPCS offers full assistance to manufacturers looking to get BIS ISI Certification for room heaters.

Our services include:

Product applicability assessment
IS 302-2-30:2007 requirement review
Product grouping guidance
Laboratory coordination
Product testing support
Technical documentation
BIS application filing
Factory inspection preparation
BIS query handling
Observation closure support
Licence assistance
Post-certification guidance

In addition to the standard, testing scope, and application readiness, our approach is to cover the current BIS product-manual requirements and product grouping when competing service pages. In the past six years, we have successfully provided more than 600+ manufacturer certifications.

Conclusion

BIS ISI Certification for Room Heaters for IS 302 (Part 2/Sec 30) is pivotal for covered room heaters that are sold in India. The standard covers electrical, thermal, mechanical, and fire safety attributes, and the BIS Product Manual covers the relevant certification, grouping, sampling, and inspection requirements.

It is advisable for manufacturers to check the type, rating, model, testing facilities and documentation of their heaters prior to the beginning of the BIS application process. Read more also about BIS Certification for Electric Immersion Water Heaters

Looking for BIS ISI Certification for Room Heaters?

UMSPCS can help in product assessment, product grouping, laboratory coordination, laboratory testing, document preparation, BIS application filing & factory inspection preparation, and support for the issuance of a licence.

Discuss your room-heater models with UMSPCS and your BIS certification needs.

Frequently Asked Questions (FAQs)

Yes, covered room heaters are part of the compulsory BIS certification programme, IS 302 (Part 2/Sec 30).

The standard that is applicable is IS 302 (Part 2/Sec 30):2007 Safety of Household and Similar Electrical Appliances Room Heaters.

The cost varies according to the type of heater, the grouping of products, the requirement for testing, the laboratory test charges and BIS charges.

The tests can include heating, leakage current, electric strength, insulation, stability, mechanical strength, construction, heat/fire resistance and other relevant safety criteria.

Yes, UMSPCS can assess your models, guide product grouping, coordinate testing and support the complete BIS licensing process.

Ready to get your electronics BIS-registered?

+91 7011067811

BIS Certification for Room Heaters