UMSPCS helps to get BIS (ISI) certification for Stainless Steel Welded Pipes and Tubes in India under IS 17876. Learn requirements, testing, and certification procedures for market access in India.
BIS ISI Certification for Stainless Steel Welded Pipes and Tubes
- BIS Registration Guidance
- Application Filing Support
- BIS Authority Coordination
- Cost & Timeline Clarity
- Complete Documentation Help
BIS ISI Certification for Stainless Steel Welded Pipes and Tubes – IS 17876:2022
🎉 Special Offer
₹499
FREE
Get Your Free Expert Consultation
Step 1: Identification of Applicable Indian Standard
Steps include: Identification of the appropriate IS Requirement of product compliance Adjusting the manufacturing process to the BIS requirement Modification of products
Step 2: Product Testing and Document Preparation
The product is tested for compliance with the relevant standard in a laboratory accredited by the NABL. The documents for certification are created at the same time.
Steps involved are:The sample of the product was tested. Technical document preparation Data to be collected from the factory and manufacturing. The process of preparing quality control documents. Application form filling
Steps involved are:
Step 3: Application Filing with BIS
After the above procedures are completed, the application will be submitted to BIS with the necessary paperwork and fees.
Steps include: Submitting an application to BIS. Submitting test reports Submitting factory data The government fee must be paid. The initial investigation by the BIS officials.
Steps include:
Step 4: BIS Factory Inspection
An inspection is carried out by the officials of BIS to determine the manufacturing capacity and quality management system.
This stage involves: Manufacturing process evaluation Production facility assessment Evaluation of quality control system. Testing facilities evaluation Product sampling (if necessary)
This stage involves:
Stage 5: Laboratory Test and Evaluation of Test Reports
The sample collected at the time of inspection is sent to the identified laboratories for testing, and the test report is directly submitted to BIS for technical review.
This stage involves: Laboratory tests of the product samples Adherence to standards verification. Submitting the test report to BIS. Technical evaluation performed by BIS officials.
This stage involves:
Stage 6: Closing of Non-Conformity Issues
If any non-conformities are found in the inspection or testing, they must be corrected before certification.
This stage involves: Responses to observations made by BIS Taking corrective measures Revised documents (if necessary) Non-conformance issues closed (also known as defects)
This stage involves:
Step 7: Payment of License & Marking Fees
Once the evaluation process is completed, the manufacturer should pay the necessary fees.
The steps involved are: The fee for payment of the licence is due to BIS. Payment of ISI marking fees Conducted final compliance procedures.
The steps involved are:
Step 8: Grant of BIS Licence
Once all the certification is completed successfully, BIS issues an ISI licence to the manufacturer, and the products certified under the ISI can be marked with the ISI mark.
The results of this step: This is the process of obtaining an ISI License from BIS. Use of the ISI Mark is permitted. Legal permission for the manufacturing and marketing of the certified products Conforming to BIS rules
The results of this step:
| Particulars | Estimated Cost (INR) |
|---|---|
Application Fees (BIS) |
₹1,000 |
Testing Charges (Lab Fees) |
15000- ₹2,50,000 |
Factory Inspection Charges |
₹7000 |
Annual License Fees |
₹1,000 |
Marking Fees (ISI Mark Usage) |
As per BIS norms (based on production) |
Consultancy Charges (UMSPCS) |
₹ 50000 |
UMSPCS provides quotes based on each project after analysing the needs of the product. The average duration is as follows:
- Duration: thirty to forty business days
- AIF Products: 180 days, sometimes
Frequently Asked Questions (FAQs)
Yes, products that fall under the Stainless Steel Pipes and Tubes (Quality Control) Order 2025 need to satisfy all BIS conditions and have the Standard Mark under the BIS license.
Indian Standard: IS 17876:2022.
The tests that may be performed include chemical composition, tensile properties, hardness, flattening, reverse flattening, flange testing, size, grain size, corrosion, and other applicable requirements.
Foreign manufacturers who are eligible can get the BIS certification, depending on the applicable BIS certification route and requirements.
UMSPCS offers the entire support with product assessment, document preparation, laboratory coordination, application filing, factory inspection preparation, technical queries, and BIS licence assistance.
